Skip to Content Information Center
Lexmark MS310

Lexmark MS310

Nije vaš proizvod?

Configuring Sleep and Hibernate modes

Sleep and Hibernate are low‑power operating modes.

Notes:

  • If your printer is connected directly to a computer, access the Sleep and Hibernate mode settings using the Local Printer Settings Utility or Printer Settings depending on your operating system.
  • Three days is the default amount of time before the printer enters Hibernate mode.
  • Wake the printer from Hibernate mode before sending a print job. A long press of the Sleep button wakes the printer from Hibernate mode.
  • If the printer is in Hibernate mode, then the Embedded Web Server is disabled.

  1. Open a Web browser, and then type the printer IP address in the address field.

    Notes:

    • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section.
    • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

  2. Click Settings > General Settings > Sleep Button Settings.

  3. From the “Press Sleep Button” or “Press and Hold Sleep Button” menu, select Sleep or Hibernate.

  4. Click Submit.
Da li vam je ovaj članak pomogao?
Top