CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Pull out the tray completely.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Adjust the width and length guides.
Loading A5‑size paper
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Pull up and slide the width guide to the position for A5.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Squeeze, and then slide the length guide to the position for A5 until it clicks into place.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Remove the A5 length guide from its holder.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Insert the A5 length guide into its designated slot.
Note: Press the A5 length guide until it clicks into place.
Loading A4‑, letter‑, legal‑, oficio‑, and folio‑size paper
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Pull up and slide the width guide to the correct position for the size of paper you are loading.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length guide is not attached, then proceed to step d.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Put the A5 length guide in its holder.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Squeeze, and then slide the length guide to the correct position for the paper size you are loading.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Load the paper stack with the printable side facedown for one‑sided printing.
- Make sure the paper is loaded properly.
One‑sided printing | Two‑sided (duplex) printing |
---|
| |
- Make sure the paper is below the maximum paper fill indicator.
Warning—Potential Damage: Overfilling the tray can cause paper jams.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Insert the tray.
Note: Press the paper stack down while inserting the tray.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.
Note: Set the correct paper size and type to avoid paper jams and print quality problems.