Product Information Guide

February 2022
© 2016 Lexmark International, Inc.

All rights reserved.


GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.


Trademarks

Lexmark and the Lexmark logo are trademarks or registered trademarks of Lexmark International, Inc. in the United States and/or other countries.

All other trademarks are the property of their respective owners.

Overview

This document contains basic safety, environmental, and regulatory information for your product. Some items may not be applicable to your printer. For more information, go to http://support.lexmark.com.

Additional notices, legal, and licensing information associated with this product can be found in the Notices section of the printer CD and the User's Guide.

Modified versions of source code covered by the GNU Lesser General Public License (LGPL) may be obtained by contacting customer support.

Document change history

DateChanges

October 2022

Added machine types and model numbers for the following products: MX432, XM3142.

April 2022

  • Added machine types and model numbers for the following products: CS943, CX930, CX931, CX942, CX943, CX944, MX931, XC9325, XC9335, XC9445, XC9455, XC9465.
  • Updated the Japanese telecom notice.
  • Updated the Taiwan NCC notice.

January 2022

  • Added machine types and model numbers for the following products: C4342, C4352, CS730, CS735, CX730, CX735, XC4342, XC4352.
  • Added the notice on lithium-ion rechargeable battery (for the European Union).
  • Added the Turkey WEEE notice.
  • Updated the Taiwan NCC RF notice statement.
  • Added information on digital passport.
  • Added the statement on applicability of Regulation (EU) 2019/2015 and (EU) 2019/2020.
  • Updated the Notice to users of the New Zealand telephone network.
  • Updated the Sleep Mode information.

February 2021

  • Added machine types and model numbers for the following products: C2326, M1342, XC2326, XM1342.
  • Added the United Kingdom (UK) conformity statements.
  • Updated the European Community (EC) directives conformity statements.
  • Updated the radio interference notice for class A products.
  • Updated the India E‑Waste notice.
  • Added information on EPEAT‑registered products.

September 2020

  • Added machine types and model numbers for the following products: XC4143, XC6153, XC8163, XC9225.
  • Renamed Industry Canada as Innovation, Science and Economic Development Canada.
  • Updated the European Community (EC) directives conformity statements.
  • Updated the China RoHS information.

May 2020

Added machine types and model numbers for the following products: CS439, MS439.

April 2020

  • Added machine types and model numbers for the following products: B3340, B3442, C3426, CS431, CX431, MB3442, MC3426, MS331, MS431, MX331, MX431, XC4153.
  • Updated the Sleep Mode statement.

July 2019

  • Updated the device classification information and added machine types and model numbers for the following products: C4150, CS720, CS725, CS725R, CS727, CS728, CX725, CX725R, CX727, XC4140, XC4150.
  • Added regulatory notices for RFID models.
  • Updated the safety notice about lifting the printer.
  • Added the declaration of conformity for the fax module in MB2236.
  • Added machine types and model numbers for the following products: C3224, C3326, CS331, CX331, MB2236, MC3224, MC3326.
  • Added information on Lexmark's privacy policy governing the use of products.
  • Updated the Sleep Mode statement.
  • Updated the Conventions topic to remove a caution type about rotating fan blades.
  • Deleted the safety notice about rotating fan blades.

January 2019

  • Added machine types and model numbers for the following products: B2236, MB2236.
  • Updated the Conventions topic to add a caution type about moving parts.
  • Added the safety notice about moving parts.
  • Updated the Japanese telecom notice.
  • Updated the Taiwan RoHS information.
  • Updated the Taiwan NCC RF notice statement.

June 2018

  • Added machine types and model numbers for the following products: B2865, C2240, C2325, C2425, C2535, CS421, CS521, CS622, CX421, CX522, CX622, CX625, M5255, M5270, MB2770, MC2325, MC2425, MC2535, MC2640, MS725, MS821, MS822, MS823, MS825, MS826, MX721, MX722, MX725, MX822, MX826, XC2235, XC4240, XM5365, XM5370, XM7355, XM7370.
  • Updated the section on total energy usage.
  • Updated the India E‑Waste notice.
  • Updated the Japanese telecom notice.
  • Updated the Industry Canada (Canada) statement.
  • Updated the Taiwan NCC RF notice statement.
  • Updated the European Community (EC) directives conformity statement relating to radio equipment.

April 2018

  • Added information on using genuine Lexmark parts and supplies.
  • Updated the notice to users of the U.S. telephone network.
  • Updated the notice to users of the Canadian telephone network.

March 2018

  • Added machine types and model numbers for the following products: B2338, B2442, B2546, B2650, M1242, M1246, M3250, MB2338, MB2442, MB2546, MB2650, MS321, MS421, MS521, MS621, MS622, MX321, MX421, MX521, MX522, MX622, XM1242, XM1246, XM3250.
  • Updated the Taiwan RoHS information.
  • Updated recycling information.
  • Updated the notice to users of the New Zealand telephone network.
  • Updated the Federal Communications Commission (FCC) compliance information statements.

August 2017

  • Added machine types and model numbers for the following products: C9235, CS921, CS923, CS927, CX920, CX921, CX922, CX923, CX924, XC9235, XC9245, XC9255, XC9265.
  • Updated the fax notices.
  • Added regulatory notices for wireless products.

June 2017

  • Added machine types and model numbers for the following products: CS727, CS728, CS827, CX727, CX827.
  • Updated the Taiwan RoHS information.
  • Updated the China RoHS information.

September 2016

  • Added the safety notice about printer models that are not suitable for use in locations where children are likely to be present.

August 2016

  • Added the XC4140 printer model.
  • Updated the European Community directives and radio interference notices.
  • Deleted European Union telecommunication notices.

March 2016

  • Added machine types and model numbers for the following products: C4150, C6160, CS820, CS720, CS725, CX725, CX820, CX825, CX860, XC6152, XC8155, XC8160, XC4150.
  • Added a Class A notice for Brazil.
  • Added Taiwan RoHS information.
  • Revised the safety notice about connecting a telecommunications cord.

January 2016

Initial document release for the following products: C4150, C6160, CS820, CS720, CS725, CX725, CX820, CX825, CX860, XC6152, XC8155, XC8160, XC4150.

Finding information about the printer

What are you looking for?Find it here

The latest supplemental information, updates, and customer support:

  • Documentation
  • Driver downloads
  • Live chat support
  • E‑mail support
  • Voice support

http://support.lexmark.com

Note:  Select your country or region, and then select your product to view the appropriate support site.

Support telephone numbers and hours of operation for your country or region can be found on the support website or on the printed warranty that came with your printer.

Have the following information ready when you contact customer support:

  • Place and date of purchase
  • Machine type and serial number

Information on how to set up, configure, and use the accessibility features of your printer

Accessibility Guide at http://support.lexmark.com

Warranty information

Warranty information varies by country or region:

  • In the U.S.—See the Statement of Limited Warranty included with the printer, or go to http://support.lexmark.com.
  • In other countries and regions—See the printed warranty that came with the printer.

Information on Lexmark’s digital passport

https://csr.lexmark.com/digital-passport.php

For Lexmark technical support, go to http://support.lexmark.com.

For information on Lexmark's privacy policy governing the use of this product, go to www.lexmark.com/privacy.

For information on supplies and downloads, go to www.lexmark.com.

Safety information

Conventions

Note: A note identifies information that could help you.

Warning: A warning identifies something that could damage the product hardware or software.

CAUTION: A caution indicates a potentially hazardous situation that could injure you.

    Different types of caution statements include:

    CAUTION—POTENTIAL INJURY:  Indicates a risk of injury.

    CAUTION—SHOCK HAZARD:  Indicates a risk of electrical shock.

    CAUTION—HOT SURFACE:  Indicates a risk of burn if touched.

    CAUTION—TIPPING HAZARD:  Indicates a crush hazard.

    CAUTION—PINCH HAZARD:  Indicates a risk of being caught between moving parts.

Product statements

CAUTION—POTENTIAL INJURY:  To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.

CAUTION—POTENTIAL INJURY:  To avoid the risk of fire or electrical shock, use only the power cord provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY:  Do not use this product with extension cords, multioutlet power strips, multioutlet extenders, or UPS devices. The power capacity of these types of accessories can be easily overloaded by a laser printer and may result in a risk of fire, property damage, or poor printer performance.

CAUTION—POTENTIAL INJURY:  Only a Lexmark Inline Surge Protector that is properly connected between the printer and the power cord provided with the printer may be used with this product. The use of non-Lexmark surge protection devices may result in a risk of fire, property damage, or poor printer performance.

CAUTION—POTENTIAL INJURY:  To reduce the risk of fire, use only a 26 AWG or larger telecommunications (RJ-11) cord when connecting this product to the public switched telephone network. For users in Australia, the cord must be approved by the Australian Communications and Media Authority.

CAUTION—SHOCK HAZARD:  To avoid the risk of electrical shock, do not place or use this product near water or wet locations.

CAUTION—SHOCK HAZARD:  To avoid the risk of electrical shock, do not set up this product or make any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a lightning storm.

CAUTION—POTENTIAL INJURY:  Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

CAUTION—SHOCK HAZARD:  To avoid the risk of electrical shock, make sure that all external connections (such as Ethernet and telephone system connections) are properly installed in their marked plug-in ports.

CAUTION—SHOCK HAZARD:  To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

CAUTION—SHOCK HAZARD:  To avoid the risk of electrical shock, do not use the fax feature during a lightning storm.

CAUTION—SHOCK HAZARD:  To avoid the risk of electrical shock when cleaning the exterior of the printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before proceeding.

CAUTION—POTENTIAL INJURY:  If the printer weight is greater than 20  kg (44  lb), then it may require two or more people to lift it safely.

CAUTION—POTENTIAL INJURY:  When moving the printer, follow these guidelines to avoid personal injury or printer damage:

  • Make sure that all doors and trays are closed.
  • Turn off the printer, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer.
  • If the printer has separate floor-standing optional trays or output options attached to it, then disconnect them before moving the printer.
  • If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over thresholds and breaks in flooring.
  • If the printer does not have a caster base but is configured with optional trays or output options, then remove the output options and lift the printer off the trays. Do not try to lift the printer and any options at the same time.
  • Always use the handholds on the printer to lift it.
  • Any cart used to move the printer must have a surface able to support the full footprint of the printer.
  • Any cart used to move the hardware options must have a surface able to support the dimensions of the options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.
  • Make sure that your fingers are not under the printer when you set it down.
  • Make sure that there is adequate clearance around the printer.

CAUTION—TIPPING HAZARD:  Installing one or more options on your printer or MFP may require a caster base, furniture, or other feature to prevent instability causing possible injury. For more information on supported configurations, see www.lexmark.com/multifunctionprinters.

CAUTION—TIPPING HAZARD:  To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed.

CAUTION—HOT SURFACE:  The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

CAUTION—PINCH HAZARD:  To avoid the risk of a pinch injury, use caution in areas marked with this label. Pinch injuries may occur around moving parts, such as gears, doors, trays, and covers.

CAUTION—POTENTIAL INJURY:  This product uses a laser. Use of controls or adjustments or performance of procedures other than those specified in the User’s Guide may result in hazardous radiation exposure.

CAUTION—POTENTIAL INJURY:  The lithium battery in this product is not intended to be replaced. There is a danger of explosion if a lithium battery is incorrectly replaced. Do not recharge, disassemble, or incinerate a lithium battery. Discard used lithium batteries according to the manufacturer's instructions and local regulations.

The following products are not suitable for use in locations where children are likely to be present:

    C4150, C4342, C4352, C6160, C9235, CS720, CS725, CS725R, CS727, CS728, CS730, CS735, CS820, CS827, CS921, CS923, CS927, CX725, CX725R, CX727, CX730, CX735, CX820, CX825, CX827, CX860, CX920, CX921, CX922, CX923, CX924, XC4140, XC4143, XC4150, XC4153, XC4342, XC4352, XC6152, XC6153, XC8155, XC8160, XC8163, XC9225, XC9235, XC9245, XC9255, XC9265

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

Refer service or repairs, other than those described in the user documentation, to a service representative.

SAVE THESE INSTRUCTIONS.

Environmental information

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR® emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as of the date of manufacture.

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product in watts (W).

Note:  Some modes may not apply to your product.

ModelOperating mode
PrintCopyScanReadySleepHibernateOff

B2236

460 W

N/A

N/A

4 W

1.2 W

N/A

0.1 W

B2338, MS321

520 W

N/A

N/A

7 W

1.8 W

0.1 W

0.1 W

B2442, M1242, MS421

570 W

N/A

N/A

7.5 W

1.6 W

0.1 W

0.1 W

B2546, M1246, MS521

620 W

N/A

N/A

8 W

2.0 W

0.1 W

0.1 W

B2650, M3250, MS621, MS622

670 W

N/A

N/A

9.5 W

1.1 W

0.1 W

0.1 W

B2865, MS823

800 W

N/A

N/A

20 W

1.6 W

0.2 W

0.2 W

B3340, MS331

550 W

N/A

N/A

5.5 W

0.9 W

0.1 W

0.1 W

B3442, M1342, MS431, MS439

570 W

N/A

N/A

4.9 W

0.9 W

0.1 W

0.1 W

C2240, CS622

570 W

N/A

N/A

22.5 W

1.4 W

0.2 W

0.2 W

C2325

400 W

N/A

N/A

20.5 W

1.4 W

0.2 W

0.2 W

C2326, C3426, CS431, CS439

400 W

N/A

N/A

17 W

1.2 W

N/A

0.1 W

C2425, CS421

400 W

N/A

N/A

22 W

1.2 W

0.2 W

0.2 W

C2535

530 W

N/A

N/A

22 W

1.6 W

0.2 W

0.2 W

C3224

385 W

N/A

N/A

15.5 W

0.9 W

N/A

0.1 W

C3326, CS331

395 W

N/A

N/A

15 W

0.8 W

N/A

0.1 W

C4150, CS725, CS728

680 W

N/A

N/A

45 W

2.2 W

0.3 W

0.2 W

C4342, CS730

610 W

N/A

N/A

27 W

1 W

0.1 W

0.1 W

C4352, CS735

740 W

N/A

N/A

25 W

1 W

0.1 W

0.1 W

C6160, CS820, CS827

800 W

N/A

N/A

45.4 W

1.3 W

0.3 W

0.2 W

C9235, CS921, CS927

575 W

N/A

N/A

140 W

1 W

0.2 W

0 W

CS521

530 W

N/A

N/A

22 W

1.3 W

0.2 W

0.2 W

CS720, CS727

560 W

N/A

N/A

45 W

2.4 W

0.2 W

0.2 W

CS923

1050 W

N/A

N/A

200 W

2.1 W

0.2 W

0 W

CS943

767 W

N/A

N/A

76 W

1.3 W

0.1 W

0.1 W

CX331, MC3326

395 W

385 W

24 W

17 W

1.1 W

N/A

0.1 W

CX421, MC2325, MC2425

400 W

425 W

25 W

25 W

2.2 W

0.2 W

0.2 W

CX431, MC3426, XC2326

400 W

395 W

21 W

17.5 W

1.3 W

N/A

0.1 W

CX522, MC2535, XC2235

530 W

485 W

28.5 W

26.5 W

1.4 W

0.2 W

0.2 W

CX622

580 W

560 W

29.5 W

28.5 W

1.7 W

0.2 W

0.2 W

CX625, XC4240

580 W

540 W

28 W

29.5 W

1.8 W

0.2 W

0.2 W

CX725, CX727, XC4150, XC4153,

700 W

460 W

85 W

40.6 W

1.7 W

0.2 W

0.2 W

CX730, XC4342

630 W

640 W

44.5 W

31.5 W

1 W

0.1 W

0.1 W

CX735, XC4352

760 W

800 W

45 W

32 W

1.2 W

0.1 W

0.1 W

CX820, CX827, XC6152, XC6153

760 W

870 W

115 W

70 W

1.5 W

0.3 W

0.2 W

CX825, XC8155

825 W

650 W

110 W

63 W

1.4 W

0.3 W

0.2 W

CX860, XC8160, XC8163

870 W

650 W

115 W

64.3 W

1.5 W

0.3 W

0.2 W

CX920, XC9225

575 W

600 W

230 W

220 W

2.8 W

0.2 W

0 W

CX921, XC9235

675 W

700 W

230 W

220 W

1.5 W

0.2 W

0 W

CX922, XC9245

1000 W

1075 W

250 W

230 W

2.7 W

0.2 W

0 W

CX923, XC9255

1075 W

1100 W

250 W

230 W

2.8 W

0.2 W

0 W

CX924, XC9265

1250 W

1275 W

250 W

230 W

1.2 W

0.2 W

0 W

CX930, XC9325

381 W

434 W

103 W

72 W

1.1 W

0.1 W

0.1 W

CX931, XC9335

477 W

540 W

120 W

93 W

1.2 W

0.1 W

0.1 W

CX942, XC9445

710 W

780 W

136 W

96 W

1.2 W

0.1 W

0.1 W

CX943, XC9455

790 W

880 W

132 W

88 W

1.2 W

0.1 W

0.1 W

CX944, XC9465

840 W

870 W

125 W

88 W

1.2 W

0.1 W

0.1 W

M5255, MS821, MS822

670 W

N/A

N/A

21.5 W

1.4 W

0.2 W

0.2 W

M5270, MS825, MS826

830 W

N/A

N/A

21 W

1.4 W

0.2 W

0.2 W

MB2236adw

460 W

460 W

N/A

5.5 W

1.2 W

N/A

0.1 W

MB2236adwe

460 W

460 W

9.5 W

6.0 W

1.1 W

N/A

0.2 W

MB2338, MX321

520 W

550 W

14.5 W

10.5 W

1.3 W

0.1 W

0.1 W

MB2442, MX421, XM1242

570 W

590 W

17.5 W

11.5 W

1.3 W

0.1 W

0.1 W

MB2546, MX521

620 W

630 W

20 W

14.5 W

1.5 W

0.1 W

0.1 W

MB2650, XM3250

670 W

680 W

23.5 W

16.5 W

2.5 W

0.1 W

0.1 W

MB2770, MX722, XM5370

850 W

890 W

73 W

32 W

1.9 W

0.2 W

0.2 W

MB3442, MX431adw, XM1342

580 W

600 W

14 W

7.5 W

1.1 W

0.1 W

0.1 W

MC2640

580 W

560 W

29.5 W

28.5 W

1.9 W

0.2 W

0.2 W

MC3224adwe

385 W

385 W

22 W

17 W

1.1 W

N/A

0.1 W

MC3224dwe

385 W

385 W

N/A

17 W

1.1 W

N/A

0.1 W

MS725

720 W

N/A

N/A

108 W

1.3 W

0.2 W

0.2 W

MX331

530 W

550 W

13 W

6.5 W

0.8 W

0.1 W

0.1 W

MX431adn

580 W

600 W

14 W

7 W

0.9 W

0.1 W

0.1 W

MX432, XM3142

580 W

600 W

14 W

7 W

0.9 W

0.1 W

0.1 W

MX522

620 W

630 W

20 W

14.5 W

1.4 W

0.1 W

0.1 W

MX622

670 W

680 W

23.5 W

16.5 W

1.8 W

0.1 W

0.1 W

MX721, XM5365

800 W

830 W

75 W

31 W

1.7 W

0.2 W

0.2 W

MX725

810 W

870 W

158 W

124 W

1.6 W

0.1 W

0.1 W

MX822, XM7355

690 W

750 W

84 W

32.1 W

1.8 W

0.2 W

0.2 W

MX826, XM7370

850 W

900 W

86 W

34.5 W

2.9 W

0.2 W

0.2 W

MX931

455 W

490 W

130 W

87 W

1.1 W

0.2 W

0.1 W

XC4140, XC4143

700 W

460 W

85 W

42.7 W

1.7 W

0.2 W

0.2 W

XM1246

620 W

630 W

20 W

14.5 W

1.4 W

0.1 W

0.1 W

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average. Values are subject to change.

Go to www.lexmark.com for current values.

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.

Factory default Sleep Mode Timeout for this product (in minutes):

MS725 and MX725: 5
All other models: 15

By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes, or between 1 minute and 114 minutes, depending on the printer model. If the printer speed is less than or equal to 30 pages per minute, then you can set the timeout only up to 60 minutes or 54 minutes, depending on the printer model. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.

Some models support a Deep Sleep Mode, which further reduces power consumption after longer periods of inactivity.

Hibernate Mode

This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely.

The Hibernate mode can be entered in any of the following methods:

  • Using the Hibernate Timeout
  • Using the Schedule Power modes

Factory default Hibernate Timeout for this product in all countries or regions

3 days

The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between one hour and one month.

Notes on EPEAT-registered imaging equipment products:

  • Standby power level occurs in Hibernate or Off mode.
  • The product shall automatically power down to a standby power level of ≤ 1 W. The auto standby function (Hibernate or Off) shall be enabled at product shipment.
Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the electrical outlet.

Total energy usage

It is sometimes helpful to estimate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

Applicability of Regulation (EU) 2019/2015 and (EU) 2019/2020

Per Commission Regulation (EU) 2019/2015 and (EU) 2019/2020, the light source contained within this product or its component is intended to be used for Image Capture or Image Projection only, and is not intended for use in other applications.

Waste from Electrical and Electronic Equipment (WEEE) directive

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products.

If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

India E-Waste notice

This product including components, consumables, parts and spares complies with the “India E-Waste Rules” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1% by weight and 0.01% by weight for cadmium, except for the exemption set in the Rule.

Lithium‑ion rechargeable battery

This product may contain a coin-cell, lithium-ion rechargeable battery, which should only be removed by a trained technician. Crossed-out wheelie bin means the product should not be discarded as unsorted waste but must be sent to separate collection facilities for recovery and recycling. In the event the battery is removed, do not dispose of the battery in your household waste. There may be separate collection systems for batteries in your local community, such as a battery-recycling drop-off location. The separate collection of waste batteries assures appropriate treatment of waste including reuse and recycling and prevents any potential negative effects on human health and environment. Please responsibly dispose of the batteries.

Product disposal

Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for disposal and recycling options.

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:

Recycling Lexmark products

    To return Lexmark products for recycling:

  1. Go to www.lexmark.com/recycle.

  2. Select the product you want to recycle.

Note:  Printer supplies and hardware not listed in the Lexmark Collection and Recycling Program may be recycled through your local recycling center.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings. Lexmark also offers recycling of packaging components in some countries or regions. For more information, go to www.lexmark.com/recycle, and then choose your country or region. Information on available packaging recycling programs is included with the information on product recycling.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark recycles the box.

Using genuine Lexmark parts and supplies

Your Lexmark printer is designed to function best with genuine Lexmark parts and supplies. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. It can also affect warranty coverage. Damage caused by the use of third-party parts and supplies is not covered by the warranty. All life indicators are designed to function with Lexmark parts and supplies, and may deliver unpredictable results if third-party parts and supplies are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components.

Returning Lexmark cartridges for reuse or recycling

The Lexmark Cartridge Collection Program allows you to return used cartridges for free to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. The boxes used to return the cartridges are also recycled.

    To return Lexmark cartridges for reuse or recycling, do the following:

  1. Go to www.lexmark.com/recycle.

  2. Select the product that you want to recycle.

Regulatory information

Regulatory notices for telecommunication terminal equipment

This section contains regulatory information pertaining to products that contain an analog facsimile card.

To determine if your product contains facsimile capability, see the User's Guide or go to http://support.lexmark.com.

Notice to users of the US telephone network: FCC requirements

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA). On the back of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to your telephone company.

This equipment uses the RJ-11C Universal Service Order Code (USOC) jack.

A plug and jack used to connect this equipment to the premises’ wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. Use a compliant telephone cord (RJ-11) that is 26 AWG or larger when connecting this product to the public switched telephone network. See your setup documentation for more information.

The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact your local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (for example, 03 is a REN of 0.3). For earlier products, the REN is shown separately on the label.

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. You will also be advised of your right to file a complaint with the FCC.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International, Inc. at www.lexmark.com or your Lexmark representative. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

This equipment contains no user serviceable parts. For repair and warranty information, contact Lexmark International, Inc. See the previous paragraph for contact information.

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless said message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)

See your user documentation in order to program this information into your fax machine.

The following letter of conformity applies only to products that contain the LEX-M15-001 fax card. To determine if your product contains this fax card, refer to the label on the actual product or go to http://support.lexmark.com.

Letter of conformity
Notice to users of the Canadian telephone network

This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.

The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five. The REN is located on the product label.

This equipment uses CA11A telephone jacks.

Avis réservé aux utilisateurs du réseau téléphonique du Canada

Ce produit est conforme aux spécifications techniques d’Innovation, Sciences et Développement économique Canada.

Le numéro REN (ringer equivalence number : numéro d’équivalence de sonnerie) indique le nombre maximum d'appareils pouvant être connectés à l’interface téléphonique. En bout de ligne, le nombre d’appareils qui peuvent être connectés n’est pas directement limité, mais la somme des REN de ces appareils ne doit pas dépasser cinq. Le numéro REN est indiqué sur l'étiquette produit.

Cet équipement utilise des prises de téléphone CA11A.

Notice to users of the New Zealand telephone network

The following are special conditions for the Facsimile User Instructions. The grant of a telepermit for any item of terminal equipment indicates only that Spark has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Spark, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Spark's network services.

This equipment shall not be set up to make automatic calls to the Spark “111” Emergency Service.

This equipment may not provide for the effective hand-over of a call to another device connected to the same line.

This equipment should not be used under any circumstances that may constitute a nuisance to other Spark customers.

This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Spark will accept no responsibility should difficulties arise in such circumstances.

The decadic (or pulse) dialing on this device is unsuitable for use on the Spark network in New Zealand.

For correct operation, the total of all the Ringer Equivalence Numbers (RENs) of all parallel devices connected to the same telephone line may not exceed 5. The REN of this device is located on the label.

This device uses an RJ-11C modular connector. Contact your point of purchase if a BT adapter is required. The Lexmark part number is 80D1873.

Some parameters required for compliance with Spark's telepermit requirements are dependent on the equipment associated with this device. The associated equipment shall be set to operate within the following limits for compliance to Spark's specifications:

  • There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and
  • The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next call attempt.
  • The equipment shall be set to ensure that automatic calls to different numbers are spaced such that there is not less than 5 seconds between the end of one call attempt and the beginning of another.
Japanese telecom notice

The installed optional modem is in compliance with Japanese Telecommunication Law and has been certified by JATE, with the following Certification Number:

Lexmark International, Inc.

Product name

Lexmark regulatory type/model number of the installed fax card

Certification number

CX331, CX421, CX431, CX522, CX622, CX625, CX730, CX735, CX930, CX931, CX942, CX943, CX944, MB2338, MB2442, MB2546, MB2650, MB2770, MB3442, MC2325, MC2425, MC2535, MC2640, MC3224, MC3326, MC3426, MX321, MX331, MX421, MX431, MX521, MX522, MX622, MX721, MX722, MX725, MX822, MX826, MX931, XC2235, XC2326, XC4240, XC4342, XC9325, XC9335, XC9445, XC9455, XC9465, XM1242, XM1246, XM1342, XM3250, XM5365, XM5370, XM7355, XM7370

LEX-M14-002

A18-0046001

CX421, CX522, CX622, CX625, CX725, CX725R, CX727, CX827, CX820, CX825, CX860, CX920, CX921, CX922, CX923, CX924, MB2770, MC2325, MC2425, MC2535, MC2640, MX432, MX721, MX722, MX725, MX822, MX826, XC2235, XC4140, XC4143, XC4150, XC4153, XC4240, XC4352, XC6152, XC6153, XC8155, XC8160, XC8163, XC9225, XC9235, XC9245, XC9255, XC9265, XM3142, XM5365, XM5370, XM7355, XM7370

LEX-M03-002

A11-0160001JP

MB2236

LEX-M15-001

A21-0128001

Using this product in Switzerland

This product requires a Swiss billing tone filter (Lexmark part number 80D1877) to be installed on any line which receives metering pulses in Switzerland.

Utilisation de ce produit en Suisse

Cet appareil nécessite l’utilisation d’un filtre de tonalité de facturation suisse (nº de référence Lexmark : 80D1877) devant être installé sur toute ligne recevant des impulsions de comptage en Suisse.

Verwendung dieses Produkts in der Schweiz

Für dieses Produkt muss ein schweizerischer Billing Tone Filter zur Zählzeichenübertragung (Lexmark Teilenummer 80D1877) für jede Leitung installiert werden, über die in der Schweiz Zeitsteuertakte übertragen werden.

Uso del prodotto in Svizzera

Questo prodotto richiede un filtro toni Billing svizzero, (codice Lexmark 80D1877) da installare su tutte le linee che ricevono impulsi remoti in Svizzera.

Regulatory notices for wireless products

This section contains regulatory information that applies only to wireless models.

If in doubt as to whether your model is a wireless model, go to http://support.lexmark.com.

Modular component notice

Wireless models contain one of the following modular components:

Lexmark Regulatory Type/Model Number LEX-M07-001; FCC ID:IYLLEXM07001; IC:2376A-LEXM07001
Lexmark Regulatory Type/Model Number LEX-M08-001; FCC ID:IYLLEXM08001; IC:2376A-LEXM08001
AzureWave Technologies, Inc. Model: AW-CM276NF; FCC ID:TLZ-CM276NF; IC:6100A-CM276NF
AzureWave Technologies, Inc. Model: AW-CM467-SUR; FCC ID:TLZ-CM467; IC:6100A-CM467

To determine which modular components are installed in your particular product, refer to the labeling on your actual product.

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Innovation, Science and Economic Development Canada

Under Innovation, Science and Economic Development Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Innovation, Science and Economic Development Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that necessary for successful communication.

This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Innovation, Sciences et Développement économique Canada

Selon la réglementation d'Innovation, Sciences et Développement économique Canada, l'émetteur radio ne fonctionne qu'avec une antenne dont le type et le gain maximal (ou inférieur) ont été approuvés par Innovation, Sciences et Développement économique Canada. Pour réduire les interférences radio potentielles auprès d'autres utilisateurs, le type d'antenne et son gain doivent être choisis de telle sorte que la puissance isotrope rayonnée équivalente (PIRE) ne soit pas supérieure à ce qui est nécessaire pour assurer la réussite de la communication.

Cet appareil est conforme aux normes RSS exemptes de licence d'Innovation, Sciences et Développement économique Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférences et (2) il doit accepter toutes les interférences, y compris les celles qui peuvent entraîner un fonctionnement indésirable.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directive 2014/53/EU on the approximation and harmonization of the laws of the Member States relating to radio equipment.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The EEA/EU authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. The EEA/EU Importer is: Lexmark International Technology S.à.r.l. 20, Route de Pré-Bois, ICC Building, Bloc A, CH-1215 Genève, Switzerland. A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative or may be obtained at www.lexmark.com/en_us/about/regulatory-compliance/european-union-declaration-of-conformity.html.

Compliance is indicated by the CE marking:

Restrictions

This radio equipment is restricted to indoor use only. Outdoor use is prohibited. This restriction applies to all the countries listed in the table below:

AT

BE

BG

CH

CY

CZ

DE

DK

EE

EL

ES

FI

FR

HR

HU

IE

IS

IT

LI

LT

LU

LV

MT

NL

NO

PL

PT

RO

SE

SI

SK

TR

UK (NI)

EU and other countries statement of radio transmitter operational frequency bands and maximum RF power

This radio product transmits in either the 2.4GHz (2.412–2.472 GHz in the EU) or 5GHz (5.15–5.35, 5.47–5.725 in the EU) bands. The maximum transmitter EIRP power output, including antenna gain, is ≤ 20dBm for both bands.

United Kingdom (UK) conformity

This product is in conformity with the protection requirements of the Radio Equipment Regulations 2017.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The UK Importer is: Lexmark International Ltd, Highfield House, Foundation Park - 8 Roxborough Way, Maidenhead Berkshire - SL6 3UD, United Kingdom. A declaration of conformity is available upon request from the UK Importer or may be obtained at www.lexmark.com/en_us/about/regulatory-compliance/uk-declaration-of-conformity.html.

Compliance is indicated by the UKCA marking:

Restrictions or requirements in the UK

This radio equipment is restricted to indoor use only. Outdoor use is prohibited.

UK statement of radio transmitter operational frequency bands and maximum RF power

This radio product transmits in either the 2.4GHz (2.412–2.472 GHz in the UK) or 5GHz (5.15–5.35, 5.47–5.725 in the UK) bands. The maximum transmitter EIRP power output, including antenna gain, is ≤ 20dBm for both bands.

Regulatory notices for RFID products

This section contains regulatory information that applies only to the following RFID model or models:

CS725R, CX725R

Modular component notice (RFID)

RFID models contain the following modular component:

Lexmark Regulatory Type/Model Number: FCC ID:IYL0528RFU; IC:2376A-0528RFU

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Innovation, Science and Economic Development Canada

This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Innovation, Sciences et Développement économique Canada

Cet appareil est conforme aux normes RSS exemptes de licence d'Innovation, Sciences et Développement économique Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférences et (2) il doit accepter toutes les interférences, y compris les celles qui peuvent entraîner un fonctionnement indésirable.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directive 2014/53/EU on the approximation and harmonization of the laws of the Member States relating to radio equipment.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The EEA/EU authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. The EEA/EU Importer is: Lexmark International Technology S.à.r.l. 20, Route de Pré-Bois, ICC Building, Bloc A, CH-1215 Genève, Switzerland. A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative or may be obtained at www.lexmark.com/en_us/about/regulatory-compliance/european-union-declaration-of-conformity.html.

Compliance is indicated by the CE marking:

EU and other countries statement of radio transmitter operational frequency bands and maximum RF power

This radio product transmits in the 865–868MHz band in the EU. The maximum transmitter EIRP power output, including antenna gain, is ≤ 21dBm.

United Kingdom (UK) conformity

This product is in conformity with the protection requirements of the Radio Equipment Regulations 2017.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The UK Importer is: Lexmark International Ltd, Highfield House, Foundation Park - 8 Roxborough Way, Maidenhead Berkshire - SL6 3UD, United Kingdom. A declaration of conformity is available upon request from the UK Importer or may be obtained at www.lexmark.com/en_us/about/regulatory-compliance/uk-declaration-of-conformity.html.

Compliance is indicated by the UKCA marking:

UK statement of radio transmitter operational frequency bands and maximum RF power

This radio product transmits in the 865–868MHz band in the UK. The maximum transmitter EIRP power output, including antenna gain, is ≤ 21dBm.

Class A products
Product nameMachine typeModel number

B2865 (B2865dw), M5255, M5270, MS725 (MS725dvn), MS821 (MS821n, MS821dn), MS822 (MS822de), MS823 (MS823n, MS823dn), MS825 (MS825dn), MS826 (MS826de)

4064

210, 230, 235, 295, 410, 430, 438, 630, 635, 695, 830

C2240, CS622 (CS622de)

5029

636, 696

C4150, CS720 (CS720de, CS720dte), CS725 (CS725de, CS725dte), CS725R, CS727 (CS727de), CS728 (CS728de)

5028

1A5, 6A0, 6A9

C4342 (C4342de), C4352 (C4352de), CS730 (CS730de), CS735 (CS735de)

5030

235, 239, 635, 695

C6160, CS820 (CS820de, CS820dte, CS820dtfe), CS827 (CS827de)

5063

530, 539, 571

C9235, CS921 (CS921de), CS923 (CS923de), CS927 (CS927de)

5059

130, 190, 530

CS943 (CS943de)

5080

435

CX622 (CX622ade, CX622de), CX625 (CX625ade, CX625adhe, CX625de), MC2640 (MC2640adwe), XC4240

7529

636, 686, 836, 838, 898

CX725 (CX725de, CX725dhe, CX725dthe), CX725R, CX727 (CX727de), XC4140, XC4143, XC4150, XC4153

7528

1A9, 5A6, 5A8, 5A9

CX730 (CX730de), CX735 (CX735adse), XC4342, XC4352

7530

236, 239, 678, 679

CX820 (CX820de, CX820dtfe), CX827 (CX827de), XC6152 (XC6152de, XC6152dtfe), XC6153 (XC6153, XC6153de)

7563

136, 137, 196, 197

CX825 (CX825de, CX825dte, CX825dtfe), CX860 (CX860de, CX860dte, CX860dtfe), XC8155 (XC8155de, XC8155dte), XC8160 (XC8160de, XC8160dte), XC8163

7564

336, 337, 536, 537, 596, 598

CX920 (CX920de), CX921 (CX921de), CX922 (CX922de), CX923 (CX923de, CX923dte, CX923dxe), CX924 (CX924dte, CX924dxe), XC9225, XC9235, XC9245, XC9255, XC9265

7559

078, 178, 198, 378, 398, 578, 598, 778, 798

CX930 (CX930dse), CX931 (CX931dse, CX931dtse), CX942 (CX942adse), CX943 (CX943adtse, CX943adxse), CX944 (CX944adtse, CX944adxse), XC9325, XC9335, XC9445, XC9455, XC9465

7580

138, 198, 238, 298, 478, 498, 678, 698, 878, 898

M3250, MS622 (MS622de)

4600

835, 895

MB2546 (MB2546adwe), MX521 (MX521de, MX521ade), MX522 (MX522adhe, MX522dhe), XM1246

7017

636, 676, 678, 679, 686

MB2650 (MB2650adwe), MX622 (MX622ade, MX622adhe, MX622de), XM3250

7018

676, 678, 679, 686

MB2770 (MB2770adwhe), MX721 (MX721ade, MX721adhe), MX722 (MX722ade, MX722adhe, MX722de, MX722dhe), MX725 (MX725adve), XM5365, XM5370

7464

036, 037, 096, 336, 337, 388, 396, 836

MX822 (MX822ade, MX822adxe, MX822de), MX826 (MX826ade, MX826adxe, MX826de), XM7355 (XM7355, XM7355b), XM7370

7465

436, 496, 836, 896

MX931 (MX931dse)

7450

238, 298

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Note:  To assure compliance with FCC regulations on electromagnetic interference for a Class A computing device, use a properly shielded and grounded cable such as Lexmark part number 1021231 for parallel attach or 1021294 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a violation of FCC regulations.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
Telephone: (859) 232–2000
E-mail: regulatory@lexmark.com

Innovation, Science and Economic Development Canada compliance statement

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’Innovation, Sciences et Développement économique Canada

Cet appareil numérique de classe A est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

Notice to users of Class A products in Brazil

Este produto não é apropriado para uso em ambientes domésticos, pois poderá causar interferências eletromagnéticas que obrigam o usuário a tomar medidas necessárias para minimizar estas interferências.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2014/30/EU, 2014/35/EU, and 2011/65/EU as amended by (EU) 2015/863 on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, and on the restrictions of use of certain hazardous substances in electrical and electronic equipment.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The EEA/EU authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. The EEA/EU Importer is: Lexmark International Technology S.à.r.l. 20, Route de Pré-Bois, ICC Building, Bloc A, CH-1215 Genève, Switzerland. A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative or may be obtained at www.lexmark.com/en_us/about/regulatory-compliance/european-union-declaration-of-conformity.html.

This product satisfies the Class A limits of EN 55032 and safety requirements of EN 62368-1.

United Kingdom (UK) conformity

This product is in conformity with the protection requirements of the Electromagnetic Compatibility Regulations 2016, the Electrical Equipment (Safety) Regulations 2016, and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The UK Importer is: Lexmark International Ltd, Highfield House, Foundation Park - 8 Roxborough Way, Maidenhead Berkshire - SL6 3UD, United Kingdom. A declaration of conformity is available upon request from the UK Importer or may be obtained at www.lexmark.com/en_us/about/regulatory-compliance/uk-declaration-of-conformity.html.

This product satisfies the Class A limits of BS EN 55032 and safety requirements of BS EN 62368-1.

Radio interference notice

Warning

This is a product that complies with the emission requirements of EN 55032 Class A limits and immunity requirements of EN 55035. This product is not intended to be used in residential/domestic environments.

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Class B products
Product nameMachine typeModel number

B2236 (B2236dw)

1400

438

B2338 (B2338dw), B2442 (B2442dw), B2546 (B2546dw), B2650 (B2650dw), M1242, M1246, MS321 (MS321dn), MS421 (MS421dn, MS421dw), MS521 (MS521dn), MS621 (MS621dn)

4600

230, 238, 430, 438, 490, 630, 638, 690, 830, 838

B3340 (B3340dw), B3442 (B3442dw), M1342, MS331 (MS331dn), MS431 (MS431dn, MS431dw), MS439 (MS439dn)

4601

230, 280, 4a0, 480, 489

C2325 (C2325dw), C2425 (C2425dw), C2535 (C2535dw), CS421 (CS421dn), CS521 (CS521dn)

5029

038, 230, 238, 430, 438

C2326, C3224 (C3224dw), C3326 (C3326dw), C3426 (C3426dw), CS331 (CS331dw), CS431 (CS431dw), CS439 (CS439dn)

1500

218, 638, 836, 8c6, 8c9

C4150, CS720 (CS720de, CS720dte), CS725 (CS725de, CS725dte), CS725R, CS727 (CS727de), CS728 (CS728de)

5028

135, 630, 639

CX331 (CX331adwe), CX431 (CX431adw, CX431dw), MC3224 (MC3224adwe, MC3224dwe, MC3224i), MC3326 (MC3326adwe, MC3326i), MC3426 (MC3426adw, MC3426i), XC2326

3500

285, 485, 685, 876, 8c6, 8c9

CX421 (CX421adn), CX522 (CX522ade, CX522de), MC2325 (MC2325adw), MC2425 (MC2425adw), MC2535 (MC2535adwe), XC2235

7529

081, 230, 238, 436, 486, 496

CX725 (CX725de, CX725dhe, CX725dthe), CX725R, CX727 (CX727de), XC4140, XC4143, XC4150

7528

196, 576, 578, 598

MB2236 (MB2236adw, MB2236adwe, MB2236i)

3400

481, 485

MB2338 (MB2338adw), MB2442 (MB2442adwe), MX321 (MX321adn, MX321adw), MX421 (MX421ade), XM1242

7017

238, 276, 278, 476, 478, 496

MB3442 (MB3442adw, MB3442i), MX331 (MX331adn, MX331dn), MX431 (MX431adn, MX431adw, MX431dn), MX432 (MX432adwe), XM1342, XM3142

7019

235, 4a6, 4b6, 486, 489, 6w6, 6w9

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Note:  To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device, use a properly shielded and grounded cable such as Lexmark part number 1021231 for parallel attach or 1021294 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a violation of FCC regulations.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
Telephone: (859) 232–2000
E-mail: regulatory@lexmark.com

Innovation, Science and Economic Development Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’Innovation, Sciences et Développement économique Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2014/30/EU, 2014/35/EU, 2009/125/EC, and 2011/65/EU as amended by (EU) 2015/863 on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, the ecodesign of energy-related products, and on the restrictions of use of certain hazardous substances in electrical and electronic equipment.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The EEA/EU authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. The EEA/EU Importer is: Lexmark International Technology S.à.r.l. 20, Route de Pré-Bois, ICC Building, Bloc A, CH-1215 Genève, Switzerland. A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative or may be obtained at www.lexmark.com/en_us/about/regulatory-compliance/european-union-declaration-of-conformity.html.

This product satisfies the Class B limits of EN 55032 and safety requirements of EN 62368-1.

United Kingdom (UK) conformity

This product is in conformity with the protection requirements of the Electromagnetic Compatibility Regulations 2016, the Electrical Equipment (Safety) Regulations 2016, the Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019, and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The UK Importer is: Lexmark International Ltd, Highfield House, Foundation Park - 8 Roxborough Way, Maidenhead Berkshire - SL6 3UD, United Kingdom. A declaration of conformity is available upon request from the UK Importer or may be obtained at www.lexmark.com/en_us/about/regulatory-compliance/uk-declaration-of-conformity.html.

This product satisfies the Class B limits of BS EN 55032 and safety requirements of BS EN 62368-1.

Ήταν το άρθρο χρήσιμο;
Top