Skip to Content
Information Center
資訊中心
疑難排解
瞭解印表機訊息
Lexmark MX410
不是您的產品?
搜尋資訊中心
執行
瞭解印表機訊息
碳粉匣、成像組件不符 [41.xy]
Change [paper source] to [custom string] load [paper orientation](將 [紙張來源] 變更為 [自訂字串] 載入 [紙張列印方向])
Change [paper source] to [custom type name] load [orientation](將 [紙張來源] 變更為 [自訂類型名稱] 載入 [方向])
Change [paper source] to [paper size] load [orientation](將 [紙張來源] 變更為 [紙張尺寸] 載入 [方向])
Change [paper source] to [paper type] [paper size] load [orientation](將 [紙張來源] 變更為 [紙張類型] [紙張尺寸] 載入 [方向])
Close front door(關閉前門)
Configuration change, some held jobs were not restored [57](配置變更,有些保留工作並未回復 [57])
複雜頁面,有些資料可能無法印出 [39]
Defective flash detected [51](偵測到不良的快閃記憶體 [51])
Disk full [62](磁碟已滿 [62])
Disk must be formatted for use in this device(磁碟必須予以格式化才能在此裝置中使用)
Error reading USB drive.(讀取 USB 儲存碟時發生錯誤。)Remove USB.(請移除 USB。)
Error reading USB hub.(讀取 USB 集線器時發生錯誤。)Remove hub.(請移除集線器。)
傳真機記憶體已滿
Fax partition inoperative.(傳真分割區無法運作。)Contact system administrator.(請聯絡系統管理員。)
Fax server 'To Format' not set up.(未設定傳真伺服器的「接收者格式」。)Contact system administrator.(請聯絡系統管理員。)
Fax Station Name not set up.(傳真站台名稱未設定。)Contact system administrator.(請聯絡系統管理員。)
Fax Station Number not set up.(傳真站台號碼未設定。)Contact system administrator.(請聯絡系統管理員。)
Insufficient memory, some Held Jobs were deleted [37](記憶體不足,已刪除某些保留工作 [37])
Insufficient memory, some held jobs will not be restored [37](記憶體不足,有些保留工作並不會回復 [37])
Insufficient memory to collate job [37](記憶體不足,無法逐份列印工作 [37])
Insufficient memory to support Resource Save feature [35](記憶體不足,無法支援節省資源功能 [35])
在多用途送紙器中載入 [自訂字串] [列印方向]
在多用途送紙器中載入 [自訂類型名稱] [列印方向]
在多用途送紙器中載入 [紙張尺寸] [列印方向]
在多用途送紙器中載入 [紙張類型] [紙張尺寸] [列印方向]
Load [paper source] with [custom string] [paper orientation](在 [紙張來源] 中載入 [自訂字串] [紙張列印方向])
Load [paper source] with [custom type name] [paper orientation](在 [紙張來源] 中載入 [自訂類型名稱] [紙張列印方向])
Load [paper source] with [paper size] [paper orientation](在 [紙張來源] 中載入 [紙張尺寸] [紙張列印方向])
Load [paper source] with [paper type] [paper size] [paper orientation](在 [紙張來源] 中載入 [紙張類型] [紙張尺寸] [紙張列印方向])
Memory full [38](記憶體已滿 [38])
記憶體已滿,無法列印傳真
No analog phone line connected to modem, fax is disabled.(未將類比電話線連接至數據機,傳真已停用。)
非 Lexmark [耗材類型],請參閱用戶手冊 [33.xy]
Not enough free space in flash memory for resources [52](快閃記憶體中,供資源使用的可用空間不足 [52])
印表機必須重新啟動。最後一個工作可能未完成。
重新安裝找不到或沒有回應的碳粉匣 [31.xy]
Remove paper from standard output bin(從標準出紙槽移除紙張)
Replace all originals if restarting job.(在重新啟動工作時置換所有原始頁面。)
Replace jammed originals if restarting job.(在重新啟動工作時置換夾住的原始頁面。)
更換保養套件 [80.xy]
更換不支援的碳粉匣 [32.xy]
更換不支援的成像組件 [32.xy]
Restore held jobs?(回復保留的工作?)
Scanner automatic feeder cover open(掃描器的自動送件器蓋板打開)
Scanner jam, remove all originals from the scanner [2yy.xx](掃描器夾紙,請從掃描器移除所有原始文件 [2yy.xx])
Scanner jam, remove jammed originals from the scanner [2yy.xx](掃描器夾紙,請從掃描器移除夾住的原始文件 [2yy.xx])
SMTP server not set up.(未設定 SMTP 伺服器。)Contact system administrator.(請聯絡系統管理員。)
Some held jobs were not restored(有些保留工作並未回復)
標準網路軟體錯誤 [54]
Supply needed to complete job(需要耗材才能完成工作)
裝置在「安全模式」下運作。某些列印選項可能已停用或提供非預期的結果。
Too many flash options installed [58](安裝了太多快閃記憶體選購品 [58])
Weblink server not set up.(未設定 Weblink 伺服器。)Contact system administrator.(請聯絡系統管理員。)
手冊
如何操作影片
規格
名詞解釋
安全、注意事項和慣例
Top