Skip to Content Information Center
Lexmark MS410

Lexmark MS410

Не ваш продукт?

Print quality issues

Thin (Single Pel) Lines Are Extremely Light or Not Visible
Lexmark MS310, MS410, MS510, & MS610 ? The Printer Prematurely Posts "Bin Full" Message and Stops Printing
Horizontal band at the top of the page check
Repeating White/Smudge-type Print (about 37mm or 1-1/2") Appears After Replacing the Imaging Unit
Vertical band at the middle of the page check
Repeating spots or horizontal lines check
Curved voids at the edge of the page check
Partial print at one side of the page check
Printer Spits Extra Blank Pages or Prints Random Texts from Ubuntu
Reduced or Enlarged Print Output Appears on the Second Page when Printing in Duplex Mode
Print quality issues
The last page of a multi-page duplexed print job is not printing to scale
Last page of a multi-page duplex print job is not printing to scale
Random spots or marks on the print
Repeating background or gray marks
Fixing vertical white lines or streaks appearing on the print
Faint or inconsistent prints check
Vertical dark band at the edge of the print
Full page background or gray print
Compressed print check
Partial or misaligned print output check
Toner not fused to the page
Fixing the "No analog phone line connected to modem, fax is disabled" error message
Light or faded print check
Blank printout check
Lexmark MS410d & MS410dn ? Missing Double Byte Character Set (DBCS) Fonts
Troubleshooting skewed A6 paper when fed to the MPF
The manual color correction setting or RGB replacement and general-use guidelines
Print located along the top or bottom edge of a page appears blurry or broken
Colors are too dark or black shading is covering partial or entire page
Missing color plane or very light color (one color) on printed pages
Color missing or very light print output exhibited on all colors on pages printed
Black line is on the edge or part of the page is covered in toner
Top