Skip to Content
Information Center
資訊中心
疑難排解
瞭解印表機訊息
Lexmark MS812dn / MS812dtn
不是您的產品?
搜尋資訊中心
執行
瞭解印表機訊息
碳粉匣、成像組件不符 [41.xy]
Change [paper source] to [custom string] load [orientation](將 [紙張來源] 變更為 [自訂字串] 載入 [方向])
Change [paper source] to [custom type name] load [orientation](將 [紙張來源] 變更為 [自訂類型名稱] 載入 [方向])
Change [paper source] to [paper size] load [orientation](將 [紙張來源] 變更為 [紙張尺寸] 載入 [方向])
Change [paper source] to [paper type] [paper size] load [orientation](將 [紙張來源] 變更為 [紙張類型] [紙張尺寸] 載入 [方向])
Check tray [x] connection(檢查 [x] 號紙匣組件的連接)
Close door or insert cartridge(關上門板或插入碳粉匣)
關閉分頁裝訂器後門
關閉後門
Configuration change, some held jobs were not restored [57](配置變更,有些保留工作並未回復 [57])
Defective flash detected [51](偵測到不良的快閃記憶體 [51])
Disk full [62](磁碟已滿 [62])
Disk must be formatted for use in this device(磁碟必須予以格式化才能在此裝置中使用)
Disk near full.(磁碟幾乎已滿。)Securely clearing disk space.(安全的清理磁碟空間。)
Empty the hole punch box(將打孔箱清空)
Error reading USB drive.(讀取 USB 儲存碟時發生錯誤。)Remove USB.(請移除 USB。)
Error reading USB hub.(讀取 USB 集線器時發生錯誤。)Remove hub.(請移除集線器。)
Incompatible output bin [x] [59]([x] 號出紙槽不相容 [59])
Insert hole punch box(插入打孔箱)
Insert staple cartridge(插入裝釘匣)
Insert Tray [x](插入 [x] 號紙匣組件)
Install bin [x](安裝 [x] 號出紙槽)
Install Tray [x](安裝 [x] 號紙匣組件)
Insufficient memory for Flash Memory Defragment operation [37](記憶體不足,無法進行快閃記憶體重組作業 [37])
Insufficient memory, some Held Jobs were deleted [37](記憶體不足,已刪除某些保留工作 [37])
Insufficient memory, some held jobs will not be restored [37](記憶體不足,有些保留工作並不會回復 [37])
Insufficient memory to collate job [37](記憶體不足,無法逐份列印工作 [37])
Insufficient memory to support Resource Save feature [35](記憶體不足,無法支援節省資源功能 [35])
Load [paper source] with [custom string] [paper orientation](在 [紙張來源] 中載入 [自訂字串] [紙張列印方向])
Load [paper source] with [custom type name] [paper orientation](在 [紙張來源] 中載入 [自訂類型名稱] [紙張列印方向])
Load [paper source] with [paper size] [paper orientation](在 [紙張來源] 中載入 [紙張尺寸] [紙張列印方向])
Load [paper source] with [paper type] [paper size] [paper orientation](在 [紙張來源] 中載入 [紙張類型] [紙張尺寸] [紙張列印方向])
在多用途送紙器中載入 [自訂字串] [列印方向]
在多用途送紙器中載入 [自訂類型名稱] [列印方向]
在多用途送紙器中載入 [紙張尺寸] [列印方向]
在多用途送紙器中載入 [紙張類型] [紙張尺寸] [列印方向]
Load staples(載入釘書針)
Memory full [38](記憶體已滿 [38])
已清理送紙錯誤,出紙槽內含額外的紙張 [24y.xx]
非 Lexmark [耗材類型],請參閱用戶手冊 [33.xy]
Not enough free space in flash memory for resources [52](快閃記憶體中,供資源使用的可用空間不足 [52])
Paper changes needed(需要更換紙張)
Parallel port [x] disabled [56](平行埠 [x] 已停用 [56])
印表機必須重新啟動。最後一個工作可能未完成。
Reattach bin [x](重新安裝 [x] 號出紙槽)
Reattach bin [x] – [y](重新安裝 [x] – [y] 號出紙槽)
重新安裝找不到或沒有回應的碳粉匣 [31.xy]
重新安裝找不到或沒有回應的成像組件 [31.xy]
Remove defective disk [61](移除不良磁碟 [61])
Remove packaging material, [area name](移除包裝材料,[區域名稱])
Remove paper from all bins(從所有出紙槽移除紙張)
Remove paper from bin [x](從 [x] 號出紙槽移除紙張)
Remove paper from [linked set bin name](從 [連結的設定出紙槽名稱] 取出紙張)
Remove paper from standard output bin(從標準出紙槽移除紙張)
更換保養套件,已超過建議使用期限 [80.xyz]
更換保養套件以回復列印 [80.xy]
更換找不到的加熱熔合組件 [31.xyz]
更換不支援的碳粉匣 [32.xy]
更換不支援的成像組件 [32.xy]
更換碳粉刷
Restore held jobs?(回復保留的工作?)
Serial port [x] disabled [56](序列埠 [x] 已停用 [56])
Some held jobs were not restored(有些保留工作並未回復)
標準網路軟體錯誤 [54]
Supply needed to complete job(需要耗材才能完成工作)
裝置在「安全模式」下運作。某些列印選項可能已停用或提供非預期的結果。
Too many bins attached [58](安裝了太多出紙槽 [58])
Too many disks installed [58](安裝了太多磁碟 [58])
Too many flash options installed [58](安裝了太多快閃記憶體選購品 [58])
Tray [x] paper size unsupported([x] 號送紙匣的紙張尺寸不受支援)
Unsupported disk(不支援的磁碟)
USB port [x] disabled [56](USB 連接埠 [x] 已停用 [56])
手冊
如何操作影片
規格
MS812dn
MS812dtn
名詞解釋
安全、注意事項和慣例
Top