Skip to Content Information Center
Lexmark MX810

Lexmark MX810

Not your product?

Understanding the printer messages

Cartridge, imaging unit mismatch [41.xy]
Cartridge nearly low [88.xy]
Change [paper source] to [custom string] load [orientation]
Change [paper source] to [custom type name] load [orientation]
Change [paper source] to [paper size] load [orientation]
Change [paper source] to [paper type] [paper size] load [orientation]
Close door or insert cartridge
Close finisher rear door
Close flatbed cover and load originals if restarting job [2yy.xx]
Close rear door
Close top access cover
Configuration change, some held jobs were not restored [57]
Disk full [62]
Disk full, scan job canceled
Disk must be formatted for use in this device
Disk near full. Securely clearing disk space.
Empty the hole punch box
Error reading USB drive. Remove USB.
Error reading USB hub. Remove hub.
Fax memory full
Fax partition inoperative. Contact system administrator.
Fax server 'To Format' not set up. Contact system administrator.
Fax Station Name not set up. Contact system administrator.
Fax Station Number not set up. Contact system administrator.
Insert hole punch box
Insert staple cartridge
Install bin [x]
Install Tray [x]
Insufficient memory, some held jobs will not be restored [37]
Load multipurpose feeder with [custom string] [paper orientation]
Load multipurpose feeder with [custom type name] [paper orientation]
Load multipurpose feeder with [paper size] [paper orientation]
Load multipurpose feeder with [paper type] [paper size] [paper orientation]
Load staples
Memory full, cannot print faxes
No analog phone line connected to modem, fax is disabled.
Non‑Lexmark [supply type], see User’s Guide [33.xy]
Not enough free space in flash memory for resources [52]
Paper changes needed
Printer had to restart. Last job may be incomplete.
Reinstall missing or unresponsive cartridge [31.xy]
Remove defective disk [61]
Remove packaging material, [area name]
Remove paper from all bins
Remove paper from bin [x]
Remove paper from [linked set bin name]
Remove paper from standard output bin
Replace all originals if restarting job.
Replace jammed originals if restarting job.
Replace last scanned page and jammed originals if restarting job.
Replace maintenance kit, recommended life exceeded [80.xy]
Replace maintenance kit to resume printing [80.xy]
Replace missing fuser [80.xx]
Replace separator pad
Replace unsupported cartridge [32.xy]
Replace unsupported imaging unit [32.xy]
Replace wiper
Restore held jobs?
Scan document too long
Scanner automatic feeder cover open
Scanner jam access cover open
Scanner jam, open and close automatic feeder top cover [2yy.xx]
Scanner jam, remove all originals from the scanner [2yy.xx]
Scanner jam, remove jammed originals from the scanner [2yy.xx]
SMTP server not set up. Contact system administrator.
Some held jobs were not restored
Supply needed to complete job
The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.
Too many bins attached [58]
Too many disks installed [58]
Too many flash options installed [58]
Tray [x] paper size unsupported
Unsupported disk
Weblink server not set up. Contact system administrator.
Top