Skip to Content
Information Center
資訊中心
疑難排解
瞭解印表機訊息
Lexmark MS510
不是您的產品?
搜尋資訊中心
執行
瞭解印表機訊息
碳粉匣、成像組件不符 [41.xy]
將 [紙張來源] 變更為 [自訂類型名稱] 載入 [列印方向]
將 [紙張來源] 變更為 [自訂字串] 載入 [列印方向]
將 [紙張來源] 變更為 [紙張尺寸] 載入 [列印方向]
將 [紙張來源] 變更為 [紙張類型] [紙張尺寸] 載入 [列印方向]
Close front door(關閉前門)
Configuration change, some held jobs were not restored [57](配置變更,有些保留工作並未回復 [57])
Defective flash detected [51](偵測到不良的快閃記憶體 [51])
Error reading USB drive.(讀取 USB 儲存碟時發生錯誤。)Remove USB.(請移除 USB。)
Error reading USB hub.(讀取 USB 集線器時發生錯誤。)Remove hub.(請移除集線器。)
Insufficient memory to support Resource Save feature [35](記憶體不足,無法支援節省資源功能 [35])
Insufficient memory to collate job [37](記憶體不足,無法逐份列印工作 [37])
Insufficient memory for Flash Memory Defragment operation [37](記憶體不足,無法進行快閃記憶體重組作業 [37])
Insufficient memory, some Held Jobs were deleted [37](記憶體不足,已刪除某些保留工作 [37])
Insufficient memory, some held jobs will not be restored [37](記憶體不足,有些保留工作並不會回復 [37])
Load [paper source] with [custom string] [paper orientation](在 [紙張來源] 中載入 [自訂字串] [紙張列印方向])
Load [paper source] with [custom type name] [paper orientation](在 [紙張來源] 中載入 [自訂類型名稱] [紙張列印方向])
Load [paper source] with [paper size] [paper orientation](在 [紙張來源] 中載入 [紙張尺寸] [紙張列印方向])
在多用途送紙器中載入 [自訂類型名稱] [列印方向]
在多用途送紙器中載入 [自訂字串] [列印方向]
在多用途送紙器中載入 [紙張尺寸] [列印方向]
在多用途送紙器中載入 [紙張類型] [紙張尺寸] [列印方向]
Memory full [38](記憶體已滿 [38])
非 Lexmark [耗材類型],請參閱用戶手冊 [33.xy]
Not enough free space in flash memory for resources [52](快閃記憶體中,供資源使用的可用空間不足 [52])
平行埠已停用 [56]
印表機必須重新啟動。最後一個工作可能未完成。
重新安裝找不到或沒有回應的碳粉匣 [31.xy]
重新安裝找不到或沒有回應的成像組件 [31.xy]
Remove paper from standard output bin(從標準出紙槽移除紙張)
更換保養套件 [80.xy]
更換不支援的碳粉匣 [32.xy]
更換不支援的成像組件 [32.xy]
Serial option [x] error [54](序列選項 [x] 錯誤 [54])
SMTP server not set up.(未設定 SMTP 伺服器。)Contact system administrator.(請聯絡系統管理員。)
Too many flash options installed [58](安裝了太多快閃記憶體選購品 [58])
Weblink server not set up.(未設定 Weblink 伺服器。)Contact system administrator.(請聯絡系統管理員。)
手冊
如何操作影片
規格
名詞解釋
安全、注意事項和慣例
Top