Skip to Content Information Center
Lexmark MX610

Lexmark MX610

Not your product?

Understanding the printer messages

Cartridge low [88.xy]
Cartridge, imaging unit mismatch [41.xy]
Cartridge nearly low [88.xy]
Cartridge very low, [x] estimated pages remain [88.xy]
Change [paper source] to [custom type name] load [orientation]
Change [paper source] to [custom string] load [orientation]
Change [paper source] to [paper size] load [orientation]
Change [paper source] to [paper type] [paper size] load [orientation]
Check tray [x] connection
Close rear door
Close finisher rear door
Close front door
Close flatbed cover and load originals if restarting job [2yy.xx]
Complex page, some data may not have printed [39]
Configuration change, some held jobs were not restored [57]
Defective flash detected [51]
Disk full [62]
Disk must be formatted for use in this device
Disk near full. Securely clearing disk space.
Error reading USB drive. Remove USB.
Error reading USB hub. Remove hub.
Fax memory full
Fax partition inoperative. Contact system administrator.
Fax server 'To Format' not set up. Contact system administrator.
Fax Station Name not set up. Contact system administrator.
Fax Station Number not set up. Contact system administrator.
Imaging unit low [84.xy]
Imaging unit nearly low [84.xy]
Imaging unit very low, [x] estimated pages remain [84.xy]
Incompatible tray [x] [59]
Incorrect paper size, open [paper source] [34]
Insert Tray [x]
Insufficient memory to collate job [37]
Insufficient memory, some Held Jobs were deleted [37]
Insufficient memory, some held jobs will not be restored [37]
Insufficient memory to support Resource Save feature [35]
Load [paper source] with [custom type name] [paper orientation]
Load [paper source] with [custom string] [paper orientation]
Load [paper source] with [paper size] [paper orientation]
Load [paper source] with [paper type] [paper size] [paper orientation]
Load multipurpose feeder with [custom type name] [paper orientation]
Load multipurpose feeder with [custom string] [paper orientation]
Load multipurpose feeder with [paper size] [paper orientation]
Load multipurpose feeder with [paper type] [paper size] [paper orientation]
Maintenance kit low [80.xy]
Maintenance kit nearly low [80.xy]
Maintenance kit very low, [x] estimated pages remain [80.xy]
Memory full [38]
Memory full, cannot print faxes
Network [x] software error [54]
No analog phone line connected to modem, fax is disabled.
Non‑Lexmark [supply type], see User’s Guide [33.xy]
Not enough free space in flash memory for resources [52]
Paper changes needed
Parallel port [x] disabled [56]
Printer had to restart. Last job may be incomplete.
Remove defective disk [61]
Remove paper from standard output bin
Replace all originals if restarting job.
Replace cartridge, 0 estimated pages remain [88.xy]
Replace defective imaging unit [31.xy]
Replace imaging unit, 0 estimated pages remain [84.xy]
Replace jammed originals if restarting job.
Replace maintenance kit [80.xy]
Replace missing imaging unit [31.xy]
Reinstall missing or unresponsive cartridge [31.xy]
Replace unsupported cartridge [32.xy]
Replace unsupported imaging unit [32.xy]
Restore held jobs?
Scanner automatic feeder cover open
Scanner disabled by admin [840.01]
Scanner disabled. Contact system administrator if problem persists. [840.02]
Scanner jam, remove all originals from the scanner [2yy.xx]
Scanner jam, remove jammed originals from the scanner [2yy.xx]
Serial port [x] disabled [56]
SMTP server not set up. Contact system administrator.
Some held jobs were not restored
Standard network software error [54]
Standard USB port disabled [56]
Supply needed to complete job
The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.
Too many flash options installed [58]
Too many trays attached [58]
Unformatted flash detected [53]
Unsupported disk
Unsupported option in slot [x] [55]
USB port [x] disabled [56]
Weblink server not set up. Contact system administrator.
Top