For Windows users
Using Lexmark ScanBack Utility
From the computer, run Lexmark ScanBack Utility, and then click Create profile.
Notes:
- To download the utility, go to www.lexmark.com/downloads.
- If you prefer to use an existing scanning profile, click Existing profile.
Click Setup, add then add the printer IP address.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Click OK, and then click Close.
Select the format and the size of the document to be scanned.
Select a file format and scan resolution, and then click Next.
Type a unique scan profile name.
Browse to the location that you want to save the scanned document, and then create a file name.
Note: To reuse the scan profile, enable Create Shortcut, and then create a unique shortcut name.
Click Finish.
Load an original document into the automatic document feeder or on the scanner glass.
From the control panel, navigate to Scan Profiles > Scan to Computer, and then select a scan profile.
On your computer, click Scan Complete.
Using Windows Fax and Scan
Note: Make sure that the printer is added to the computer. For more information, see Adding printers to a computer.
Load an original document into the automatic document feeder or on the scanner glass.
From the computer, open Windows Fax and Scan.
Click New Scan, and then select a scanner source.
If necessary, change the scan settings.
Scan the document.
Click Save as, type a file name, and then click Save.