Display Language - [List of languages]
| Set the language of the text that appears on the display. |
Country/Region - [List of countries or regions]
| Identify the country or region where the printer is configured to operate. |
| Run the setup wizard. |
| Select a language as a keyboard type. Note: All the Keyboard Type values may not appear or may require special hardware to appear. |
Displayed information - Display Text 1 (IP Address*)
- Display Text 2 (Date/Time*)
- Custom Text 1
- Custom Text 2
| Specify the information to appear on the home screen. |
Date and Time - Configure
- Current Date and Time
- Manually Set Date and Time
- Date Format (MM‑DD‑YYYY*)
- Time Format (12 hour A.M./P.M.*)
- Time Zone
| Configure the printer date and time. |
Date and Time - Network Time Protocol
- Enable NTP (On*)
- NTP Server
- Enable Authentication
| Configure the settings for Network Time Protocol (NTP). Note: When Enable Authentication is set to MD5 key, Key ID and Password appear. |
| Specify the unit of measurement for paper sizes. Note: The country or region selected in the initial setup wizard determines the initial paper size setting. |
Screen Brightness - 20–100% (100*)
| Adjust the brightness of the display. |
Flash Drive Access - Disabled
- Enabled*
| Enable access to the flash drive. |
| Set copies from the scanner glass to only one page at a time. |
Screen Timeout - 5–300 (60*)
| Set the idle time in seconds before the display shows the home screen, or before the printer logs out a user account automatically. |