Display Language | N/A | [List of languages] | Set the language of the text that appears on the display. |
Country/Region | N/A | [List of countries or regions] | Identify the country or region where the printer is configured to operate. |
Run initial setup | N/A | Off* On | Run the setup wizard. |
Keyboard | Keyboard Type | [List of languages] | Select a language as a keyboard type. Note: All the Keyboard Type values may not appear or may require special hardware to appear. |
Date and Time | Configure | Current Date and Time Manually Set Date and Time Date Format (MM‑DD‑YYYY*) Time Format (12 hour A.M./P.M.*) Time Zone DST (GMT) Offset DST Start DST End DST Offset | Configure the printer date and time and network time protocol. Notes: - MM‑DD‑YYYY is the U.S. factory default setting. DD‑MM‑YYYY is the international factory default setting.
- UTC (GMT) Offset, DST Start, DST End, and DST Offset appear only when Time Zone is set to (UTC+user) Custom.
- Key ID and Password appear only when Enable Authentication is set to MD5 key.
|
Network Time Protocol | Enable NTP (On*) NTP Server Enable Authentication (None*) Key ID Password |
Paper Sizes | N/A | U.S.* Metric | Specify the unit of measurement for paper sizes. Note: The country or region selected in the initial setup wizard determines the initial paper size setting. |
Screen Brightness | N/A | 20–100% (100*) | Adjust the brightness of the display. |
Flash Drive Access | N/A | Disabled Enabled* | Enable access to the flash drive function of the printer. |
Allow Background Removal | N/A | Off On* | Specify whether background removal is allowed. |
Allow Custom Job scans | N/A | Off On* | Specify whether the Custom Job Scanning setting appears for copy, scan, and fax. Note: This menu item appears only when a storage drive is installed. |
One Page Flatbed Scanning | N/A | Off* On | Set the printer to scan any type of job involving the scanner glass as a single page. Note: The printer returns to the home screen after performing a single flatbed scan instead of displaying prompts. |
Device Sounds | Mute All Sounds | Off* On | Configure the sound settings of the printer. |
Button Feedback | Off On* |
Volume | 0–10 (5*) |
ADF Loaded Beep | Off On* |
Alarm Control | Off Single* Continuous |
Cartridge Alarm | Off Single* Continuous |
Speaker Mode | Always Off* Always On On until Connected |
Ringer Volume | Off* On |
Screen Timeout | N/A | 5–300 seconds (60*) | Set the idle time in seconds before the display shows the home screen, or before the printer logs out a user account automatically. |