Skip to Content Information Center
Lexmark CS963

Lexmark CS963

Not your product?

Notifications

Menu itemSubmenu itemSettingsDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

ADF Loaded Beep

N/A

Off

On*

Specify whether the printer emits a custom beep when an original document is loaded into the ADF.

Alarm Control

N/A

Off

Single*

Continuous

Set the number of times that the alarm sounds when the printer requires user intervention.

Supplies

Show Supply Estimates

Show estimates*

Do not show estimates

Show the estimated status of the supplies.

Cartridge Alarm

Off

Single*

Continuous

Set the number of times that the alarm sounds when the toner cartridge is low.

Staple Alarm

Off*

Single

Continuous

Set the number of times that the alarm sounds when the staple cartridge is empty.

Note:  This menu item appears only when a staple finisher is installed.

Hole Punch Alarm

Off*

Single

Continuous

Set the number of times that the alarm sounds when the hole punch container is full or missing.

Note:  This menu item appears only when a staple, hole punch finisher is installed.

E‑mail Alerts Setup

Primary SMTP Gateway

The setting is user‑defined.

Type the IP address or host name of the primary SMTP server.

Primary SMTP Gateway Port

1–65535 (25*)

Enter the port number of the primary SMTP server.

Secondary SMTP Gateway

The setting is user‑defined.

Type the IP address or host name of the secondary SMTP server.

Secondary SMTP Gateway Port

1–65535 (25*)

Enter the server port number of your secondary SMTP server.

SMTP Timeout

5–30 seconds (30*)

Specify the time that the SMTP server waits before it stops trying to send an email.

Reply Address

The setting is user‑defined.

Specify a reply address in the email.

Always use SMTP default Reply Address

On

Off*

Always use the default reply address in the SMTP server.

Use SSL/TLS

Disabled*

Negotiate

Required

Send an email using an encrypted link.

Require Trusted Certificate

On*

Off

Require a trusted certificate when accessing the SMTP server.

Menu itemSubmenu itemSettingsDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

Email Alerts Setup

SMTP Server Authentication

No authentication required*

Login/Plain

NTLM

CRAM-MD5

Digest-MD5

Kerberos 5

Set the authentication type for the SMTP server.

Device‑Initiated Email

None*

Use Device SMTP Credentials

Set whether credentials are required for device‑initiated emails.

User‑Initiated Email

None*

Use Device SMTP Credentials

Use Session User ID & Password

Use Session Email address and Password

Prompt user

Set whether credentials are required for user‑initiated emails.

Use Active Directory Device Credentials

On

Off*

Enable user credentials and group designations to connect to the SMTP server.

Device Userid

The setting is user‑defined.

Specify the user ID to log in to the SMTP server.

Device Password

The setting is user‑defined.

Specify the password to log in to the SMTP server.

Kerberos 5 REALM

The setting is user‑defined.

Specify the realm for the Kerberos 5 authentication protocol.

NTLM Domain

The setting is user‑defined.

Specify the domain name for the NTLM security protocol.

Disable “SMTP server not set up” error

On

Off*

Disable an error message about the SMTP server setup.

Setup Email Lists and Alerts

The setting is user‑defined.

Specify the email addresses and enable the email alert.

Note:  This menu item appears only in the Embedded Web Server.

Error Prevention

ADF Multifeed Sensor

Off

On*

Set the printer to detect when the ADF picks more than one sheet of paper at once.

Auto Continue

Off

On*

Let the printer continue processing or printing a job automatically after clearing certain attendance conditions.

Note:  When set to On, the default setting is 5 seconds.

Auto Reboot

Reboot when idle

Reboot always*

Reboot never

Set the printer to restart when an error occurs.

Max Auto Reboots

1–20 (2*)

Set the number of automatic reboots that the printer can perform.

Auto Reboot Window

1–525600 (720*)

Set the number of seconds before the printer performs an automatic reboot.

Auto Reboot Counter

The setting is a read‑only information.

Show the number of automatic reboots that the printer has performed.

Display Short Paper Error

On

Auto‑clear*

Set the printer to show a message when a short paper error occurs.

Note:  Short paper refers to the size of the paper loaded.

Page Protect

Off*

On

Set the printer to process the entire page into the memory before printing it.

Jam Content Recovery

Jam Recovery

Off

On

Auto*

Set the printer to reprint jammed pages.

Scanner Jam Recovery

Job level

Page level*

Specify how to restart a scan job after resolving a paper jam.
Was this article helpful?


Related content

Top