Open door A.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
Open door A1, and then remove the jammed paper.
Note: Make sure that all paper fragments are removed.
Close door A1, and then close door A.
Lift the paper transport cover F, and then remove the jammed paper.
Note: Make sure that all paper fragments are removed.
Close the cover.
Open the trifold/Z‑fold finisher door.
Remove the jammed paper from any of the following locations.
Note: Make sure that all paper fragments are removed.
Pull out the finisher bin.
Remove the jammed paper from any of the following locations.
Note: Make sure that all paper fragments are removed.
- Handle 2E
Note: Make sure to return the handle to its original position.
- Knob 2C
- Handle 2F
Note: Make sure to return the handle to its original position.
- Handle 2G
Note: Make sure to return the handle to its original position.
Push the finisher bin back into place, and then close the trifold/Z‑fold finisher door.
Open the booklet finisher door.
Remove the jammed paper from any of the following locations.
Note: Make sure that all paper fragments are removed.
- Handle 3A
Note: Make sure to return the handle to its original position.
- Knob 3B
- Handle 3C
Note: Make sure to return the handle to its original position.
- Handle 3D
Note: Make sure to return the handle to its original position.
Pull out the booklet maker.
Turn knob 4A, and then remove the jammed paper.
Note: Make sure that all paper fragments are removed.
Push the booklet maker back into place, and then close the finisher door.