Lexmark MX517
E‑mail Server Setup
Specify e‑mail server information.
Send a copy of the e-mail to the sender.
Note: Never appears is the factory default setting.
Specify the maximum e-mail size.
Note: E-mails above the specified size are not sent.
Send a message when an e-mail is greater than the configured size limit.
Specify a domain name, such as a company domain name, and then limit e‑mail destinations only to that domain name.
Note: You can only specify one domain.
Define the e‑mail server Web link settings.
Note: The characters * : ? < > | are invalid entries for a path name.
Format
Specify the file format.
Notes:
PDF Settings
Configure the PDF settings.
Content Type
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
Content Source
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Color
Specify whether the printer captures and transmits content in color.
Note: On is the factory default setting.
Resolution
Specify the resolution of the scan in dots per inch.
Note: 150 dpi is the factory default setting.
Darkness
Lighten or darken the output.
Note: 5 is the factory default setting.
Orientation
Specify the orientation of the scanned image.
Note: Portrait is the factory default setting.
Original Size
Specify the size of the original document.
Note: Letter is the U.S. factory default setting. A4 is the international factory default setting.
Sides (Duplex)
Specify the orientation of the original documents loaded in the ADF for two‑sided scanning.
Note: Off is the factory default setting.
JPEG Quality
Set the quality of a JPEG photo image in relation to file size and quality of the image.
Text Default
Set the quality of a text image in relation to file size and quality of the image.
Note: 75 is the factory default setting.
Text/Photo Default
Set the quality of a text or photo image in relation to file size and the quality of the image.
Photo Default
Set the quality of a photo image in relation to file size and the quality of the image.
Note: 50 is the factory default setting.
E‑mail images sent as
Specify how the images are sent.
Note: Attachment is the factory default setting.
Use Multi‑Page Tiff
Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑e-mail job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job.
TIFF Compression
Specify the format used in compressing TIFF files.
Note: LZW is the factory default setting.
Transmission Log
Enable printing of a transmission log after each e-mail job.
Note: Print log is the factory default setting.
Log Paper Source
Specify the paper source for printing e-mail logs.
Note: Tray 1 is the factory default setting.
E‑mail Bit Depth
Enable the Text/Photo mode to produce smaller file sizes by using 1‑bit images when Color is set to Off.
Note: 8 bit is the factory default setting.
Custom Job scanning
Copy a document that contains mixed paper sizes.
Scan Preview
Specify whether a preview appears on the display for scan jobs.
Allow Save as Shortcut
Save e-mail addresses as shortcuts.
Background Removal
Adjust the amount of background visible on a scanned image.
Note: 0 is the factory default setting.
Color Balance
Enable an equal balance of colors in the output.
Color Dropout
Specify which color to drop and to adjust the dropout setting for each color threshold.
Contrast
Specify the contrast of the output.
Note: Best for content is the factory default setting.
Mirror Image
Create a mirror image of the original document.
Negative Image
Create a negative image of the original document.
Shadow Detail
Adjust the amount of shadow detail visible on a scanned image.
Adjust ADF Skew
Correct the slight skew in the scanned image.
Scan edge to edge
Specify whether the original document is scanned edge-to-edge.
Sharpness
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Temperature
Specify warm or cool outputs. Cool values generate a bluer output than the default while warm values generate a redder output than the default.
Use cc:/bcc:
Enable the use of the cc and bcc fields.