Lexmark MX310
Display Language
Set the language of the text that appears on the display.
Note: Not all languages are available for all models. You may need to install special hardware for some languages.
Show Supply Estimates
View supply estimates on the control panel, Embedded Web Server, menu settings, and device statistics reports.
Note: Show estimates is the factory default setting.
Eco-Mode
Minimize the use of energy, paper, or specialty media.
Notes:
ADF Loaded Beep
Enable an ADF beep sound when loading paper.
Note: Enabled is the factory default setting.
Quiet Mode
Reduce printer noise.
Note: Off is the factory default setting.
Run Initial Setup
Run the setup wizard.
Paper Sizes
Specify the unit of measurement for paper sizes.
Note: US is the factory default setting.
Scan to PC Port Range
Specify a valid port range for printers behind a port blocking firewall.
Note: 9751:12000 is the factory default setting.
Home screen customization
Change the icons that appear on the home screen.
Select from the following options:
One Page Copy
Set copies from the scanner glass to only one page at a time.
Allow Background Removal
Specify whether to allow image background removal.
Note: On is the factory default setting.
Allow Custom Job Scans
Scan multiple jobs to one file.
Scanner Jam Recovery
Specify how to reload a scanned job when a paper jam occurs in the ADF.
Note: Job Level is the factory default setting.
Alarms
Set an alarm when the printer requires user intervention.
Timeouts
Set the idle time before the printer begins operating in Sleep Mode.
Print a job with the display turned off.
Note: Display on when printing is the factory default setting.
Set the time before the printer enters Hibernate mode.
Note: 3 days is the factory default setting.
Set the printer to Hibernate mode when there is an active Ethernet connection.
Note: Do Not Hibernate is the factory default setting.
Set the idle time before the display returns to Ready state.
Note: 30 seconds is the factory default setting.
Set the printer to end a print job after it has been idle for the specified amount of time.
Set the time the printer waits to receive for more data before canceling a print job.
Error Recovery
Automatically reboot the printer.
Note: Reboot always is the factory default setting.
Determine the number of automatic reboots the printer can perform.
Note: 2 is the factory default setting.
Print Recovery
Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Note: Auto is the factory default setting. The printer reprints jammed pages unless other tasks need the memory required to hold pages.
Set the printer to check for jammed paper.
Set the printer to print the correct output for a page.
Accessibility Settings
Adjust the Voice Guidance speaking rate.
Note: Normal is the factory default setting.
Set the headphones volume.
Note: 5 is the factory default setting.
Information Sent to Lexmark
Send anonymous device usage information to Lexmark.
Note: The default value depends on what you selected during the initial setup.
Press Sleep Button
Determine how the printer, while in idle state, reacts to a short press of the Sleep button.
Note: Sleep is the factory default setting.
Press and Hold Sleep Button
Determine how the printer, while in idle state, reacts to a long press of the Sleep button.
Note: Do Nothing is the factory default setting.
Factory Defaults
Restore the printer factory default settings.
Custom Home Message
Select a custom home message that appears as an alternating display of the printer status.
Export Configuration Package
Export the configuration package to a flash drive.
Export Compressed Logs File
Export the compressed logs file to a flash drive.
Here are methods on how to obtain the Menu Settings page.
General Fax Setup Troubleshooting for Most Lexmark MFPs (2011)