Staple Job | Off* 1 staple, top left corner 2 staples, left 1 staple, top right corner 2 staples, top 1 staple, bottom left corner 2 staples, bottom 1 staple, bottom right corner 2 staples, right | Specify the staple position for all print jobs. Note: This menu item appears only when a staple finisher is installed. |
Staple Test | Start | Determine whether the staple finisher is functioning properly. Note: This menu item appears only when a staple finisher is installed. |
Hole Punch | Off* On | Punch holes along the edge of the printed output. Note: This menu item appears only when a staple, hole punch finisher is installed. |
Hole Punch Mode | 2 holes 3 holes 4 holes | Set the hole punch mode for the printed output. Notes: - 3 holes is the U.S. factory default setting. 4 holes is the international factory default setting.
- This menu item appears only when a staple, hole punch, or booklet finisher is installed.
|
Offset Pages | None* Between Copies Between Jobs | Offset the output of each print job or each copy of a print job. Notes: - Between Copies offsets each copy of a print job if Collate is set to On [1,2,1,2,1,2]. If Collate is set to Off [1,1,1,2,2,2], then each set of printed pages is offset, such as all pages designated as 1 and all pages designated as 2.
- Between Jobs sets the same offset position for the entire print job regardless of the number of copies printed.
|