Set Hostname | The setting is user‑defined. | Set the current TCP/IP host name. |
Domain Name | The setting is user‑defined. | Set the domain name. |
Allow DHCP/BOOTP to update NTP server | On* Off | Allow the Dynamic Host Configuration Protocol (DHCP) and BOOTstrap Protocol (BOOTP) clients to update the NTP settings of the printer. |
Zero Configuration Name | The setting is user‑defined. | Specify a service name for the zero configuration network. |
Enable Auto IP | Off On* | Assign an IP address automatically. |
DNS Server Address | The setting is user‑defined. | Specify the current Domain Name System (DNS) server address. |
Backup DNS Server Address | The setting is user‑defined. | Specify the backup DNS server addresses. |
Backup DNS Server Address 2 |
Backup DNS Server Address 3 |
Domain Search Order | The setting is user‑defined. | Specify a list of domain names to locate the printer and its resources that reside in different domains on the network. |
Enable DDNS | Off* On | Update the Dynamic DNS settings. |
DDNS TTL | The setting is user‑defined. | Specify the current DDNS settings. |
Default TTL |
DDNS Refresh Time |
Enable mDNS | Off On* | Update the multicast DNS settings. |
WINS Server Address | The setting is user‑defined. | Specify a server address for Windows Internet Name Service (WINS). |
Enable BOOTP | Off* On | Allow the BOOTP to assign a printer IP address. |
Restricted Server List | The setting is user‑defined. | Specify the IP addresses that are allowed to communicate with the printer over TCP/IP. Notes: - Use a comma to separate each IP address.
- You can add up to 50 IP addresses.
|
Restricted Server List Options | Block All Ports* Block Printing Only Block Printing and HTTP Only | Specify the access option for IP addresses that are not in the list. |
MTU | 256–1500 Ethernet (1500*) | Specify a maximum transmission unit (MTU) parameter for the TCP connections. |
Raw Print Port | 1–65535 (9100*) | Specify a raw port number for printers connected on a network. |
Outbound Traffic Maximum Speed | Off* On | Set the maximum transfer rate of the printer. Note: When enabled, the option for this setting is 100–1000000 Kilobits/second. |
TLS Support | Enable TLSv1.0 (Off*) Enable TLSv1.1 (Off*) Enable TLSv1.2 (On*) | Enable the Transport Layer Security protocol. |
SSL Cipher List | The setting is user-defined. | Specify the cipher algorithms to use for the SSL or the TLS connections. |
TLSv1.3 SSL Cipher List |