Lexmark MB2442
The following conditions may delay the sensor trigger that causes the printer firmware to interrupt the process and post the 280.15 paper jam.
Possible cause
These steps below will help prevent the jam from occurring.
Properly set the ADF tray guides and make sure to put the media straight with no gaps.
Disable the Auto-Deskew by performing these steps:
Note: This will ignore sensor trigger and delay in signals so there will be no interruption done by printer firmware, however, this may cause skewed image on the copy/scan.
If the issue persist, please check the printer firmware and update it to the latest version. See article Downloading the latest Lexmark printer firmware on how to check, download and update the printer firmware.
Note: This issue is a hardware design limitation but this has been compensated in FW5. So the exposure is limited to machines running on FW4.
If the issue persists, search for more information related to this issue or contact support for further assistance.
LEGACY ID: SO8562
Alinee el área de digitalización del ADF con la ubicación del papel para evitar que se recorten las imágenes durante la digitalización.
Cambie el rodillo de separación del ADF cuando comience a haber problemas de inclinación, carga incorrecta o alimentación múltiple del papel. Descubra cómo retirar e instalar el rodillo.