Defect Symptom200.05 Paper Jam – The Input sensor was covered too long. Possible cause is a multi-sheet feed that is shingled. The sheet behind could have been staged and was picked early.
Customer Repair Action & TroubleshootingFan media in paper input tray to prevent sheets from sticking together.
When jam occurs, remove Cartridge/Imaging Unit and verify two sheets are present with less than 3/4 inches (19mm) gap between them.
Repair Sequence 1 (Copy into Siebel)For MS/X 310/410:
Replace the ACM Clutch.
For MS/X 51x/61x:
Replace the Input Tray.
Parts repair 1For MS/X310/410:
40X8265 – ACM Clutch
For MS/X51x:
40X8305 – 250 Tray
For MX/X61x:
40X8086 – 550 Tray
Repair sequence 2 (Copy into Siebel)N/A
Parts repair 2N/A
LEGACY ID: SO7293