Installing the offset stacker

CAUTION—SHOCK HAZARD:  To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.


1. Turn off the printer.

   


2. Unplug the power cord from the electrical outlet, and then from the printer.

   


3. Unpack the offset stacker, and then remove all the packing material.



4. Attach the inner rear cover to the offset stacker.

   


5. Remove the standard bin.

   Note:  Do not throw away the bin.

   


6. Remove the paper transport connector cover.

   Note:  Do not throw away the cover.

   


7. Before installing the option, place the exit bin flag into the closed position.

   


8. Align, and then install the offset stacker to the printer.

   

   Note:  Make sure that the parts are securely attached and aligned to the printer.

   


9. Attach the protective strips of the offset stacker to the printer.

   


10. Place the exit bin flag into the open position.

    


11. Attach the bin flag cover until it clicks into place.

    


12. Connect one end of the printer power cord to the printer, and then the other end to the electrical outlet.

    
    CAUTION—POTENTIAL INJURY:  To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.



13. Turn on the printer.

Add the offset stacker in the print driver to make it available for print jobs. For more information, see Adding available options in the print driver.