Skip to Content
Information Center
Informacijsko središče
Troubleshooting
Understanding the printer messages
Replace jammed originals if restarting job.
Lexmark MX517
To ni vaš izdelek?
Iskanje po informacijskem središču
Pojdi
Replace jammed originals if restarting job.
From the printer control panel, try one or more of the following:
Select
Cancel job
to clear the message and cancel the scan job. For non‑touch‑screen printer models, press
to confirm.
Select
Scan from automatic feeder
to continue scanning from the ADF immediately after the last successful scan job. For non‑touch‑screen printer models, press
to confirm.
Select
Scan from flatbed
to continue scanning from the scanner immediately after the last successful scan job. For non‑touch‑screen printer models, press
to confirm.
Select
Finish job without further scanning
to end the last successful scan job. For non‑touch‑screen printer models, press
to confirm.
Select
Restart job
to restart the scan job with the same settings from the previous scan job. For non‑touch‑screen printer models, press
to confirm.
Je bil ta članek koristen?
Da
Ne
Priročniki
Videoposnetki z navodili
Specifikacije
Slovarček
Varnostne informacije, obvestila in konvencije
Top