Lexmark MS417
Display Language
Set the language of the text appearing on the display.
Show Supply Estimates
View the estimates of the supplies on the control panel, Embedded Web Server, menu settings, and device statistics reports.
Eco-Mode
Minimize the use of energy, paper, or specialty media.
Note: Off is the factory default setting. This resets the printer to its factory default settings.
Quiet Mode
Minimize the printer noise.
Note: Off is the factory default setting.
Run Initial setup
Run the setup wizard.
Paper Sizes
Specify the unit of measurement for paper sizes.
Notes:
Timeouts
Set the amount of time in minutes the printer waits after a job is printed before it goes into a reduced power state.
Print a job with the display turned off.
Note: Display on when printing is the factory default setting.
Set the amount of time the printer waits before it enters Hibernate mode.
Note: 3 days is the factory default setting.
Set the printer to Hibernate mode even if there is an active Ethernet connection.
Note: Do Not Hibernate is the factory default setting.
Set the amount of time in seconds before returning the control panel to a Ready state.
Note: 30 is the factory default setting.
Set the amount of time in seconds the printer waits to receive an end‑of‑job message before canceling the rest of the job.
Set the amount of time in seconds the printer waits for additional data before canceling a print job.
Note: 40 is the factory default setting.
Error Recovery
Set the printer to restart when an error occurs.
Print Recovery
Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Note: Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.
Set the printer to automatically check for jammed paper.
Successfully print a page that may not have printed otherwise.
Press Sleep Button
Determine how the printer, while in idle state, reacts to a short press of the Sleep button.
Note: Sleep is the factory default setting.
Press and Hold Sleep Button
Determine how the printer, while in idle state, reacts to a long press of the Sleep button.
Note: Do nothing is the factory default setting.
Factory Defaults
Use the printer factory default settings except the Network/Ports menu settings.
Custom Home Message
Select a custom home message that appears as an alternating display of the printer status.