Lexmark MS610de / MS610dte
1 This menu item appears only in touch‑screen printer models.
2 This menu item appears only in non‑touch‑screen printer models.
Display Language
Set the language of the text that appears on the display.
Note: Not all languages are available for all models. You may need to install special hardware for some languages.
Show Supply Estimates
View supplies estimates on the control panel, Embedded Web Server, menu settings, and device statistics reports.
Eco-Mode
Minimize the use of energy, paper, or specialty media.
Notes:
Quiet Mode
Reduce the printer noise.
Note: Off is the factory default setting.
Run Initial Setup
Run the setup wizard.
Keyboard1
Specify a language and custom key information for the keyboard on the display.
Paper Sizes
Specify the unit of measurement for paper sizes.
Displayed Information1
Specify the display information in the upper corners of the home screen.
Select from the following options:
Specify the text to display in the upper corners of the home screen.
Note: You can type up to 32 characters.
Displayed Information (continued)1
Specify the display information for Black Toner.
Customize the display information for certain menus.
Home screen customization
Change the icons that appear on the home screen.
Date Format1
Format the printer date.
Note: MM‑DD‑YYYY is the U.S. factory default setting. DD-MM-YYYY is the international factory default setting.
Time Format1
Format the printer time.
Note: 12 hour A.M./P.M. is the factory default setting.
Screen Brightness1
Specify the brightness of the display.
Note: 100 is the factory default setting.
Audio Feedback1
Set button volume and feedback.
Show Bookmarks1
Specify whether to display Bookmarks from the Held Jobs area.
Note: Yes is the factory default setting.
Web Page Refresh Rate1
Specify the number of seconds between Embedded Web Server refreshes.
Note: 120 is the factory default setting.
Contact Name1
Specify a contact name for the printer.
Note: The contact name is stored on the Embedded Web Server.
Location1
Specify the printer location.
Note: The location is stored on the Embedded Web Server.
Alarms1
Set an alarm when the printer requires user intervention.
Timeouts
Set the duration of idle time before the printer enters a lower power state.
Note: 15 minutes is the factory default setting.
Set the idle time before the printer begins operating in Sleep Mode.
Print a job with the display turned off.
Note: Display on when printing is the factory default setting.
Set the time before the printer enters Hibernate mode.
Note: 3 days is the factory default setting.
Set the printer to Hibernate mode even if there is an active Ethernet connection.
Note: Hibernate is the factory default setting.
Set the idle time before the display automatically returns to Ready state.
Note: 30 seconds is the factory default setting.
Remain in the same location and reset the Screen Timeout timer instead of returning to the home screen.
Set the printer to end a print job after it has been idle for the specified amount of time.
Set the time the printer waits to receive data from the host.
Set the time the printer waits for user intervention before it holds jobs that require unavailable resources.
Error Recovery
Set the printer to restart when an error occurs.
Note: Reboot always is the factory default setting.
Determine the number of automatic reboots that the printer can perform.
Note: 2 is the factory default setting.
Print Recovery
Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Note: Auto is the factory default setting. The printer reprints jammed pages unless other printer tasks need the memory required to hold the pages.
Set the printer to check for jammed paper automatically.
Note: On is the factory default setting.
Set the printer to print the correct output for a page.
Accessibility Settings1
Adjust the Voice Guidance speaking rate.
Note: Normal is the factory default setting.
Set the headphones volume.
Note: 5 is the factory default setting.
Information Sent to Lexmark
Send anonymous device usage information to Lexmark.
Note: The default value depends on what you selected during the initial setup.
Send anonymous device function and error information to Lexmark.
Set the time for sending anonymous information to Lexmark.
Press Sleep Button
Determine how the printer, while in idle state, reacts to a short press of the Sleep button.
Note: Sleep is the factory default setting.
Press and Hold Sleep Button
Determine how the printer, while in idle state, reacts to a long press of the Sleep button.
Note: Do nothing is the factory default setting.
Factory Defaults
Restore the printer factory default settings.
Custom Home Message2
Select a custom home message that appears as an alternating display of the printer status.
Export Configuration File1
Export configuration files to a flash drive.