Skip to Content
Information Center
Informacijsko središče
Paper and specialty media guide
Paper guidelines
Selecting preprinted forms and letterhead
Lexmark MS812dn / MS812dtn
To ni vaš izdelek?
Iskanje po informacijskem središču
Pojdi
Selecting preprinted forms and letterhead
Use grain long for 60–90‑g/m
2
(16–24‑lb) paper.
Use only forms and letterhead printed using an offset lithographic or engraved printing process.
Avoid paper with rough or heavily textured surfaces.
Use inks that are not affected by the resin in toner. Inks that are oxidation‑set or oil‑based generally meet these requirements; latex inks might not.
Print samples on preprinted forms and letterheads considered for use before buying large quantities. This determines whether or not the ink in the preprinted form or letterhead will affect print quality.
When in doubt, contact your paper supplier.
Je bil ta članek koristen?
Da
Ne
Priročniki
Videoposnetki z navodili
Specifikacije
MS812dn
MS812dtn
Slovarček
Varnostne informacije, obvestila in konvencije
Top