Supplies - Show Supply Estimates
- Show estimates*
- Do not show estimates
| Show the estimated status of the supplies. |
Supplies - Custom Supply Notifications
| Configure notification settings when the printer requires user intervention. Note: This menu item appears only in the Embedded Web Server. |
E‑mail Alerts Setup - E‑mail Setup
- Primary SMTP Gateway
- Primary SMTP Gateway Port (25*)
- Secondary SMTP Gateway
- Secondary SMTP Gateway Port (25*)
- SMTP Timeout (30 seconds*)
- Reply Address
- Always use SMTP default Reply Address(Off*)
- Use SSL/TLS(Disabled*)
- Require Trusted Certificate(On*)
- SMTP Server Authentication(No authentication required*)
- Device‑Initiated E‑mail(None*)
- Device Userid
- Device Password
- NTLM Domain
| Configure the e‑mail settings of the printer. Note: In some printer models, this menu can be configured only from the Embedded Web Server. |
Error Prevention - Jam Assist
| Set the printer to check for jammed paper automatically. |
Error Prevention - Auto Continue
- Auto Continue Time
| Let the printer continue processing or printing a job automatically after clearing certain attendance conditions. Note: Auto Continue Time is available only in some printer models. |
Error Prevention - Auto Reboot
- Auto Reboot
- Reboot always*
- Reboot never
- Reboot when idle
| Set the printer to restart when an error occurs. |
Error Prevention - Auto Reboot
| Set the number of automatic reboots that the printer can perform. |
Error Prevention - Auto Reboot
| Set the number of seconds before the printer performs an automatic reboot. |
Error Prevention - Auto Reboot
| Show a read‑only information of the reboot counter. |
Error Prevention - Display Short Paper Error
| Set the printer to show a message when a short paper error occurs. Note: Short paper refers to the size of the paper loaded. |
Error Prevention - Page Protect
| Set the printer to process the entire page into the memory before printing it. |
Jam Content Recovery - Jam Recovery
| Set the printer to reprint jammed pages. Note: In some printer models, Off is the default setting. |