| Set the current TCP/IP host name. |
| Set the domain name. Note: This menu item appears only in some printer models. |
| Allow the DHCP and BOOTP clients to update the NTP settings of the printer. |
| Specify a service name for the zero configuration network. Note: This menu item appears only in some printer models. |
| Assign an IP address automatically. |
| Specify the current Domain Name System (DNS) server address. |
| Specify the backup DNS server addresses. |
|
|
| Specify a list of domain names to locate the printer and its resources that reside in different domains on the network. Note: This menu item appears only in some printer models. |
| Update the Dynamic DNS settings. |
| Specify the current DDNS settings. |
|
|
| Update multicast DNS settings. |
| Specify a server address for Windows Internet Name Service (WINS). |
| Allow the BOOTP to assign a printer IP address. |
| Specify an IP address for the TCP connections. Notes: - This menu item appears only in some printer models.
- Use a comma to separate each IP address.
- You can add up to 50 IP addresses.
|
| Specify how the IP addresses in the list can access the printer functionality. Note: This menu item appears only in some printer models. |
| Specify a maximum transmission unit (MTU) parameter for the TCP connections. |
Raw Print Port - 1–65535 (9100*)
| Specify a raw port number for printers connected on a network. |
| Enable the printer maximum transfer rate. |
| Enable the TLSv1.0 protocol. |
| Enable the TLSv1.1 protocol. |
| Specify the cipher algorithms to use for the SSL or the TLS connections. |