Solution
2.4" (6.1cm) Models Without A Touchscreen
Note: Make sure that the printer is powered on and that the Ready message is showing.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press the Menu button.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press the Right Button next to Network/Ports.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press the Right Button next to Std Network.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press the Right Button next to Network Setup.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press the Right Button next to TCP/IP.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press the Right Button next to the IP Address.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Using the number pad or arrows on the device, configure your static IP address.
.Example:
Press Left Button to count down from 255.
Press Right Button to count up from 0.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press Check to jump to the next octet.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press Check to save the address. An asterisk (*) at the end of the IP address confirms that the settings are saved.
4.3", 7", and 10" (10.9, 17.8, 25.4cm) Touchscreen Models
Note: Repeat this procedure for IP Address, Netmask, and Gateway configuration.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press the Menu button.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press the Right Button next to Network/Ports.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press the Right Button next to Standard Network.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press the Right Button next to STD NET SETUP.
Note: You might see Network 1 SETUP if using the Wireless Network Card option.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press the Right Button next to TCP/IP.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Press the Right Button next to IP Address.
![](https://publications.lexmark.com/media/ids_assets/images/transparent.png)
Enter IP address values using the numeric keypad and then press Submit.