Steps | Action | Image |
1 | Remove Waste Toner Bottle (WTB) and dispose it. Warning: If WTB is not removed, toner will explode from bottle during shipping. Note: The return label (12A8189) can be found in any after-market cartridges and waste toner bottle replacement box.
| Click here to enlarge |
2 | Remove paper and re-position the back restraints of the 550 tray assembly to A5, see red in right-hand image. | Click here to enlarge |
3 | Keep the following supply items in printer for analysis: | Click here to enlarge |
4 | Close top door then front door. Using Tape to secure Front Access Door Cover to the Side Covers at its upper left and upper right corners and secure Op Panel Display along its top edge to the Top Access Door as illustrated in right-hand image. Also secure the 550 tray assembly. | Click here to enlarge |
5 | Position Bottom Cushion (see red box in right-hand image) onto Printer Removal Tray (see blue arrow in right-hand image). Fold Tray flap against rear surface of Cushion and secure with Tape (see red arrow in right-hand image). | Click here to enlarge |
6 | Position bag onto cushion. Note: The seam of the bag is illustrated as the broken red line in right-hand image. | Click here to enlarge |
7 | USING HANDHOLDS ONLY, place Printer into bag resting on cushion ensuring rear portion of Printer Covers containing Paper Tray Cover rest within Cushion (see image below). | Click here to enlargeClick here to enlarge |
8 | Raise Bag around Printer and secure along top/rear edge of Printer with Cable Tie or tape. Note: Verify Printer rests in Cushion without damaging Paper Tray Cover.
| Click here to enlargeClick here to enlarge |
9 | Position Printer Carton with it's top opening facing printer's rear side, carton's side containing "doggy door" (see red box in right-hand image) on printer's left side and carton's bottom flaps folded "closed". | Click here to enlarge |
10 | Position Top Right Cushion (see red arrowin right-hand image) and Top Left Cushion (see blue arrow in right-hand below) onto printer, slide Printer with Tray and Cushions into Carton (see image below) | Click here to enlargeClick here to enlargeClick here to enlarge |
11 | Mark out or cover any old label and attach appropriately printed Return Label (see red box in right-hand image) onto side of Carton (side containing "doggy door", see blue box in right-hand image). | Click here to enlarge |
12 | Rotate Carton 90 degrees. Note: Verify Printer completely within Carton (see image below).
| Click here to enlargeClick here to enlarge |
13 | Tape Bottom and Top flaps of Carton. Printer is now ready to be shipped. | Click here to enlarge |