Lexmark MB2236
Note: An asterisk (*) next to a value indicates the factory default setting.
USB Configuration
Change the USB driver mode of the printer to improve its compatibility with a personal computer.
Set whether the USB device driver enumerates as a USB Simple device (single interface) or as a USB Composite device (multiple interfaces).
Set the USB port to run at full speed and disable its high‑speed capabilities.
Tray Configuration
Show message about the tray status.
Specify the page orientation when loading A5 paper size.
Set the paper source that the user fills when a prompt to load paper appears.
Set the paper source that the user fills when a prompt to load envelope appears.
Set the printer to resolve paper- or envelope-related change prompts.
Reports
Print reports about printer menu settings, status, and event logs.
Supply Usage And Counters
Reset the supply page counter or view the total printed pages.
Printer Emulations
Set the printer to recognize and use the PS data stream.
Note: This menu item appears only in some printer models.
Set the page timeout during emulation.
Reset the emulator after a print job.
Disable access to the printer message during emulation.
Fax Configuration
Specify the printer power setting when it is in fax mode.
Print Configuration
Set a text point-size value below which the high‑frequency screens are used when printing font data.
Adjust the toner density when printing or copying documents.
Device Operations
Set the printer to reduce the amount of noise that it makes when printing.
Note: Enabling this setting slows down the overall performance of the printer.
Set the printer to enable access to the control panel menus.
Note: This menu item appears only in the Embedded Web Server.
Erase all custom messages.
Erase messages that were remotely installed.
Show existing error messages on the display after the printer remains inactive on the home screen for a length of time equal to the Screen Timeout setting.
Scanner Configuration
Print a Quick Test target page.
Note: Make sure that the margin spacing on the target page is uniform all the way around the target. If it is not, then the printer margins may need to be reset.
Manually register the flatbed and ADF after replacing the ADF, scanner glass, or controller board.
Set the size, in millimeters, of the no‑print area around an ADF or flatbed scan job.
Disable the scanner if it is not working properly.
Set the byte order of a TIFF‑formatted scan output.
Set the RowsPerStrip tag value of a TIFF‑formatted scan output.