Lexmark CS531
Note: An asterisk (*) next to a value indicates the factory default setting.
USB Configuration
Change the USB driver mode of the printer to improve its compatibility with a personal computer.
Set whether the USB device driver enumerates as a USB Simple device (single interface) or as a USB Composite device (multiple interfaces).
Set the USB port to run at full speed and disable its high-speed capabilities.
Tray Configuration
Set the printer to link the trays that have the same paper type and paper size settings.
Display a message that lets the user change the paper size and paper type settings after inserting the tray.
Set the paper source that the user fills when a prompt to load paper appears.
Note: For Multipurpose Feeder to appear, in the Paper menu, set Configure MP to Cassette.
Set the paper source that the user fills when a prompt to load envelope appears.
Set the printer to resolve paper- or envelope-related change prompts.
Set the tray to support multiple universal paper sizes.
Reports
Print reports about printer menu settings, status, and event logs.
Supply Usage And Counters
Reset the supply usage history, such as number of pages and days remaining, to the factory shipped level.
Reset the counter after installing a new supply item or maintenance kit.
Reset the counter after installing a new maintenance kit.
Adjust the amount of color coverage for each printing range.
Printer Emulations
Set the printer to recognize and use the PPDS data stream.
Set the printer to recognize and use the PS data stream.
Print Emulations
Let the printer use the native fonts or free fonts in the intelligent storage drive (ISD) for printing.
Note: This menu item appears only when an ISD is installed.
Activate Forms Merge to store the forms into the hard disk or ISD.
Notes:
Activate Prescribe.
Note: The Prescribe license must be installed.
Set the page time-out during emulation.
Reset the emulator after a print job.
Disable access to printer message during emulation.
Print Configuration
Print non‑copy jobs in grayscale.
Enhance the printed output to compensate for misregistration in the printer.
Set a text point-size value below which the high-frequency screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or less use the high‑frequency screens.
Device Operations
Set the printer to operate in Quiet Mode.
Note: Enabling this setting slows down the overall performance of the printer.
Set the printer to operate in a special mode, in which it attempts to continue offering as much functionality as possible, despite known issues.
For example, when set to On, and the duplex motor is nonfunctional, the printer performs one‑sided printing of the documents even if the job is two‑sided printing.
Erase user‑defined strings for the Default or Alternate custom messages.
Erase messages that were remotely installed.
Show existing error messages on the display after the printer remains inactive on the home screen for a length of time.
Toner patch sensor setup
Set the printer to put down the correct amount of toner to maintain color consistency.
Run the full color calibration.
Print a diagnostic page that contains information on toner patch sensor calibration.
App Configuration
Enable Lexmark Embedded Solutions (LES) applications.
Use the printer settings to monitor supplies, reduce printing costs, secure documents, and a lot more.
Virtual Configuration Center (VCC) issues primary escalation KB