Units of Measure - Inches
- Millimeters
| Specify the unit of measurement for the universal paper. Note: Inches is the U.S. factory default setting. Millimeters is the international factory default setting. |
Portrait Width - 3–52
inches (8.5*)
- 76–1321
mm (216*)
| Set the portrait width of the universal paper. |
Portrait Height - 3–52
inches (14*)
- 76.2–1321
mm (356*)
| Set the portrait height of the universal paper. |
Feed Direction - Short Edge*
- Long Edge
| Set the printer to pick paper from the short edge or long edge direction. Note: Long Edge appears only when the longest edge is shorter than the maximum width supported. |