Use E‑mail SMTP Server - On*
- Off
| Use the Simple Mail Transfer Protocol (SMTP) settings for e‑mail in receiving and sending faxes. Note: When set to On, all other settings of theFax Server E‑mail Settings menu are not shown. |
| Type the IP address or host name of the primary SMTP server. |
| Enter the port number of the primary SMTP server. |
| Type the server IP address or host name of your secondary or backup SMTP server. |
| Enter the server port number of your secondary or backup SMTP server. |
| Set the time before the printer times out if the SMTP server does not respond. |
| Specify a reply address for sending fax. |
Use SSL/TLS - Disabled*
- Negotiate
- Required
| Specify whether to send fax using an encrypted link. |
| Specify a trusted certificate when accessing the SMTP server. |
| Set the authentication type for the SMTP server. |
Device‑Initiated E‑mail - None*
- Use Device SMTP Credentials
| Specify whether credentials are required for device‑initiated e‑mail. |
User‑Initiated E‑mail - None*
- Use Device SMTP Credentials
- Use Session User ID and Password
- Use Session E‑mail address and Password
- Prompt user
| Specify whether credentials are required for user‑initiated e‑mail. |
| Enable user credentials and group destinations to connect to the SMTP server. |
| Specify the user ID and password to connect to the SMTP server. |
|
| Specify the realm for the Kerberos 5 authentication protocol. |
| Specify the domain name for the NTLM security protocol. |
| Hide the “SMTP server not set up” error message. |