Lexmark MX811
Sides (Duplex)
Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
Notes:
Duplex Binding
Define the way duplexed pages are bound and printed.
Copies
Specify the default number of copies for each print job.
Note: 1 is the factory default setting.
Blank Pages
Specify whether blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
Collate
Stack the pages of a print job in sequence when printing multiple copies.
Note: “(1,2,3) (1,2,3)” is the factory default setting.
Separator Sheets
Specify whether blank separator sheets are inserted.
Separator Sheet Source
Specify the paper source for the separator sheet.
Paper Saver
Print multiple‑page images on one side of a paper.
Paper Saver Ordering
Specify the positioning of multiple‑page images when using Paper Saver.
Paper Saver Orientation
Specify the orientation of a multiple‑page document.
Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
Paper Saver Border
Print a border when using Paper Saver.
Note: None is the factory default setting.
Staple Job
Specify whether printed output is stapled.
Run Stapler Test
Print a report that confirms that the staple finisher is functioning properly.
Note: This menu item appears only when a supported staple finisher is installed.
Hole Punch
Specify whether holes will be created on printed outputs for the purpose of collecting the sheets in a binder or folder.
Hole Punch Mode
Specify the number of holes to be created on printed outputs for the purpose of collecting the sheets in a binder or folder.
Offset Pages
Offset pages at certain instances.