Lexmark CX310
Display Language
Set the language of the text appearing on the display.
Note: Not all languages are available for all models. You may need to install a special hardware for some languages.
Show Supply Estimates
View the estimates of the supplies on the control panel, Embedded Web Server, menu settings, and device statistics reports.
Note: Show estimates is the factory default setting.
Eco-Mode
Minimize the use of energy, paper, or specialty media.
Notes:
ADF Loaded Beep
Specify whether the ADF sounds a beep when paper is loaded.
Note: Enabled is the factory default setting.
Quiet Mode
Minimize the printer noise.
Note: Off is the factory default setting.
Run Initial Setup
Run the setup wizard.
Paper Sizes
Specify the unit of measurement for paper sizes.
Scan to PC Port Range
Specify a valid port range for printers behind a port blocking firewall.
Note: 9751:12000 is the factory default setting.
Home screen customization
Change the icons that appear on the home screen.
For each icon, select from the following options:
One Page Copy
Set copies from the scanner glass to only one page at a time.
Allow Background Removal
Specify whether image background removal is allowed.
Note: On is the factory default setting.
Allow Custom Job Scans
Scan multiple jobs to one file.
Note: On is the factory default setting. If On is selected, then Allow Custom Job Scans can be enabled for specific jobs.
Scanner Jam Recovery
Specify how a scanned job should be reloaded if a paper jam occurs in the ADF.
Note: Job level is the factory default setting.
Alarms
Set an alarm when the printer requires user intervention.
For each alarm type, select from the following options:
Timeouts
Set the amount of time in minutes the printer waits after a job is printed before it goes into a reduced power state.
Print a job with the display turned off.
Note: Display on when printing is the factory default setting.
Set the amount of time the printer waits before it enters Hibernate mode.
Note: 3 days is the factory default setting.
Hibernate Timeout on Connection
Set the printer to Hibernate mode even if there is an active Ethernet connection.
Note: Do Not Hibernate is the factory default setting.
Set the amount of time in seconds before returning the control panel to a Ready state.
Note: 30 is the factory default setting.
Set the amount of time in seconds the printer waits to receive an end-of-job message before canceling the rest of the job.
Set the amount of time in seconds the printer waits for additional data before canceling a print job.
Error Recovery
Set the printer to restart when an error occurs.
Note: Reboot always is the factory default setting.
Determine the number of automatic reboots the printer can perform.
Print Recovery
Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Successfully print a page that may not have printed otherwise.
Press Sleep Button
Determine how the printer, while in idle state, reacts to a short press of the Sleep button.
Note: Sleep is the factory default setting.
Press and Hold Sleep Button
Determine how the printer, while in idle state, reacts to a long press of the Sleep button.
Note: Do Nothing is the factory default setting.
Factory Defaults
Use the printer factory default settings.
Custom Home Message
Select a custom home message that appears as an alternating display of the printer status.
Here are methods on how to obtain the Menu Settings page.
General Fax Setup Troubleshooting for Most Lexmark MFPs (2011)