Lexmark MS811
Note: This menu appears only when an optional serial card is installed.
PCL SmartSwitch
Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language.
Notes:
PS SmartSwitch
Set the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language.
NPA Mode
Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.
Serial Buffer
Set the size of the serial input buffer.
Job Buffering
Temporarily store print jobs on the printer hard disk before printing.
Protocol
Select the hardware and software handshaking settings for the serial port.
Robust XON
Determine whether the printer communicates availability to the computer.
Baud
Specify the rate at which data can be received through the serial port.
Data Bits
Specify the number of data bits sent in each transmission frame.
Note: 8 is the factory default setting.
Parity
Set the parity for serial input and output data frames.
Note: None is the factory default setting.
Honor DSR
Determine whether the printer uses the DSR Signal.
Configure your printer and computer so they can communicate after installing a serial port on your printer.