Skip to Content Information Center
Lexmark M3150

Lexmark M3150

Invalid Version error when updating firmware

Issue Description:

This error mostly likely occurred because your printer's firmware level is not at the required minimum firmware level of LW1.PR4.P151.

Solution:

Verify the current firmware level on the printer; to do this:

  1. Print the Menus Settings Page.

  2. Alternatively, access the printer's Web page using the printer's IP Address, and navigate to Reports > Device Settings.

  3. Look under Device Information and take note of the Base Code value.

If the firmware level is below LW20.PR.P235 as shown in the examples below;

  • LF.PR4.P071c
  • LW1.PR4.P124
  • Any other released firmware with a number below LW20.PR.235...

Then proceed to next section of this article for contacting Lexmark Technical Support.

Still Need Help?

Have the following available and contact

Lexmark Technical Support;

  • Printer model(s)
  • Printer serial number
  • Firmware version

LEGACY ID: TE535

Was this article helpful?
Top