Open the front door.
Remove the toner cartridges.
Remove the waste toner bottle.
Note: To avoid spilling the toner, place the bottle in an upright position.
Remove the used imaging kit.
Note: Place the imaging kit on a clean, flat surface and in an upright position to avoid scratching or damaging the photoconductor drum.
Unlock the black imaging unit.
Remove the black imaging unit.
Note: Do not throw away the black imaging unit. It will be installed on the new imaging kit.
Unpack the new imaging kit.
Note: The imaging kit includes the imaging basket and the cyan, magenta, and yellow developer units.
Warning—Potential Damage: Do not expose the imaging kit to direct light. Extended exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the photoconductor drum. Doing so may affect the quality of future print jobs.
Insert the black imaging unit into the new imaging kit.
Lock the black imaging unit in place.
Insert the new imaging kit until it is fully seated.
Insert the waste toner bottle until it clicks into place.
Gently pull out the printhead wipers, and then clean the printhead lenses.
For more information on cleaning the printhead lenses, see Cleaning the printhead lenses.
Insert the toner cartridges.
Close the door.