Skip to Content Information Center
Lexmark MX722

Lexmark MX722

Other Driver Installation Paths in Windows 8

Overview

Method Installation instructions
Web Services on Devices installationxref_HO3780_xref (Windows 7 example)
Inkjet Wireless installationxref_HO3827_xref (Windows XP/Vista/7 example)
New Driver feature in PrintingProperties under the Advanced tabSee Section A below.
Print Management InstallationSee Section B below.

Windows Server 2012 recommendations and 'Class' driver information

See Section C below.

xref_HO3873_xref for the Automatic Windows 8 Installation and Windows Update articleif you are installing your USB or networked printer for the first time.


When to use

  • Replace your existing printer object or printer driver.
  • Your application generates its own PostScript or the application is better suited for PCL datastreams.
  • Your operating system automatically installed and configured a Windows 8 (Class) driver, but you require special driver features only found in the Lexmark custom PCL, PS, or UPD driver.
  • You have downloaded a diver and extracted its driver files to a specified folder or the default C:\Lexmark directory.


Windows 8 NOTES:

After downloading and extracting the driver files, Windows will attempt to automate the installation process by automatically opening Add Printer and searching the network for existing printers.

If...Then...And...
You are fine with more then one printer object...You can proceed with this installation method.xref_HO3873_xref for this installation method.
You want to replace the existing printer object with the newly downloaded and extracted printer driver...Proceed below with adding the printer through the existing printer object.

Stop the Windows discovery of printers and Cancel out of the wizard and then proceed below. Click here for image.

Windows 8 (X264 example)

StepAction
1

Again, if you have not yet downloaded and extracted a printer driver, you will need to do so now. You can find different driver packages for your printer via Lexmark.com.

2

Open Devices and Printers,

To do this, navigate to your desktop to open the Control Panel and then Devices and Printers.

3Right- click on the Printer Object you wish to replace with a different driver, and select Printer properties.
4Click on the Advanced tab.
5Click on New Driver.
6

Welcome to the Add Printer Wizard appears. Click Next.

You will see (Retrieving a list of all devices).

7 (Optional if driver is already available.)Now, if you think you have installed this driver once before, you can attempt to locate it by selecting Lexmark under Manufacturer and scrolling down the list of Printers in the right column. If so, you can select it here, and then select Next. Otherwise, proceed to the next step.
8Click Have Disk.
9

Under Copy manufacturer's files from: Click the down-arrow to next to the dialog box.

If...Then...

You see the proper path for the driver listed; e.g., C:\LEXMARK\DRIVERS\SYSXL64WIN\DRIVERS\PRINT\...

Select it, click OK, and continue to Step 11.
You do not see the proper path listed, you will have to manually locate the extracted driver .inf file...Proceed to next step.
10

Click Browse, and locate the driver .inf file. This file is located under C:\ LEXMARK by default.

Click here for an example.

11Once the .inf file shows next to File Name, click Open, and then OK from the Install From Disk window.
12You will now return to the Add Printer Driver Wizard. Select the printer you wish to install if more than one is listed, and then click Next.
13

Click Finish to complete the installation.

14A new printer object will replace the existing the printer object.

Back to Overview


Adding a Print Driver via the Print Management Console

Open the Print Management Console. xref_HO3875_xref if you are unsure how to do this.

Or, locate

Print Management icon under Search > Apps > Administrative Tools

How To install v4 drivers using the Print Management Console

Step / Action Illustration
1. Expand Print Servers
2. Expand the Print Server name

3.Two ways to install the printer.

Install PathResult

Path 1

Right-click Drivers > Add Driver.

Alternatively, click on Action > Add Driver.

Opens Add Printer Driver Wizard.

Path 2 below

Right-click Printers > Add Printer

Opens Network Printer Installation Wizard, and allows the classic Add a Printer path with these options:

  • Search the network for printers
  • Add a TCP/IP or Web Services Printer by IP address or hostname
  • Add a new printer using an existing port
  • Create a new port and add a new printer

Add Driver "Class Driver Example"

To add a v4 driver for a device, select the driver that has v4 or Class Driver in the name

Step / ActionClick Illustration to Enlarge

1. Processor Selection – Place a check next to x64 or x86, and click Next.

Use System Information to determine x86 or x64 (32-bit or 64-bit) processor).

2. Select the Manufacturer (Lexmark) and the Printer (Model), and then click Next.

The driver will have v4 or Class Driver in the name.

3. Click Finish. The driver should display in the list of installed drivers upon returning to the console.

For example: Lexmark C520 Class Driver, x64, Type-4 User Mode

<Printer Name>, <Driver>,<x64/x86>, <Version type 3/4>, <Mode>


NOTES:

  • The driver name will state Class Driver, the Config File should show PrintConfig.dll, and the driver path should be %systemroot%\system32\DriverStore....
  • Windows PowerShell Equivalent Commands – The following Windows PowerShell cmdlet or cmdlets perform the same function as the preceding procedure. Enter each cmdlet on a single line, even though they may appear word-wrapped across several lines here because of formatting constraints.

..

Path 2: Add Printer

Steps are based on the installation for each of the following Add Printer options:

Search the network for printers

This path is most beneficial attempting to locate a specific printer.

Step / ActionIllustration
1. Select Search the network for printers, and then click Next.
2. Locate and select the printer either by printer name or by IP address, and then click Next.
3. Provide a Name and select whether or not to share the printer, and then click Next.

4. You will observe Status: Installing Printer...followed by Status: Printer installation succeeded. Choose to Print test page or select Add another printer to repeat the process.

5. Click Finish.

Back to Path 2 top


Add a TCP/IP or Web Services Printer by IP address or hostname

Step / ActionIllustration
1. Select Add a TCP/IP or Web Services Printer by IP address or hostname, and then click Next.

2. Select Type of Device:

  • Autodetect
  • TCP/IP Device
  • Web Services Printer


NOTE:
For any of these selections, you have to enter Host Name or IP address or you will receive "The address is not valid" message.

3. Detecting TCP/IP (observation)
4. Detecting the driver model... (observation)
5. Provide a Name and select whether or not to share the printer, and then click Next.
6. Click Next....
7. You will observe Status: Installing Printer...followed by Status: Printer installation succeeded. Choose to Print test page or select Add another printer to repeat the process.

Back to Path 2 top


Step / ActionIllustration
1. Select Add a new printer using an existing port, locate the existing port, and then click Next.

2. Select one of the following options:

  • Use the printer driver that the wizard selected.
  • Use an existing printer driver on the computer (See next step)
  • Install a New driver (See Step 4.)

Click Next.

3. If you chose to Use an existing printer driver on the computer, then locate and select the driver, and then click Next.

(See Step 5)

4. If you chose to Install a New driver, you can attempt to perform a Windows Update to locate your driver, or select Have Disk to locate the driver .inf installation file.Click here for (X364 XL) example.
5. Complete the steps as displayed by the Add Network Printer Installation Wizard....

Back to Path 2 top


Create a new port and add a new printer

Step / ActionIllustration
1. Select Create a new port and add a new printer, locate the existing port, and then click Next.
2. Provide a Port Name and click Ok.
3. Proceed with Add a new printer using an existing port outlined in procedure directly aboveto complete the driver installation.

Back to Path 2 top


Windows Server 2012 Recommendations

Using v4 drivers with Windows Server 2012 Print Servers is recommended wherever possible. If Windows 8 client computers are being used, users and IT administrators will receive the new printing experience and receive all of the benefits of the v4 driver model. For some devices, using a v3 driver will be necessary and differences between Windows Server 2012 and previous versions of Windows will also be discussed.

  • Class Drivers – V4 drivers that ship with Windows Server 2012 are known as Class Drivers. Drivers of this type should always display Class Driver in the name.
  • Model Specific Drivers – V4 drivers that are downloaded directly from a printer manufacturer website or downloaded from Windows Update are known as Model-Specific Drivers.

Still Need Help?

If you require additional assistance, please see Contact information.
NOTE:
When calling for support, you will need your printer/model type and serial number (SN). Please call from near the computer and printer in case the technician on the phone asks you to perform a task on this device.

LEGACY ID: HO3876

Este artigo foi útil?
Top