Skip to Content Information Center
Lexmark MX722

Lexmark MX722

Video: TCP/IP Installation of a Downloaded Lexmark Driver in Windows 10 via Add Printer Wizard

About this video

This video is provided for example purposes only. It is intended to familiarize users with the installation of a Universal Print Driver (UPD) PCL XL downloaded from the Lexmark support website.


NOTE:
Windows 10 drivers may not be immediately available. In the meantime, you may use Windows 8 or 8.1 driver packages for Windows 10 supported printers.

The following sequence of procedures you need to perform are summarized in the video below:

  1. Right-click on the driver package, select Open.

  2. Observe extraction of files to temporary folder.

  3. Accept License Agreement.

  4. Select Extract, this time to a specified folder; i.e., C:\Lexmark\....

  5. Click Start.

  6. Select Add a printer using aTCP/IP address or hostname.

  7. Select Device type: TCP/IP Device.

  8. Enter the printer's IP Address.

  9. Select or highlight the printer driver, i.e., Lexmark Universal v2 XL.

  10. Click Next.

  11. Complete the installation.

  12. Verify successful installation via Control Panel > Devices and Printers.

If unable to view the video above, see the video below. You may need to wait for the video to load since the file size is approximately ~2MB.

LEGACY ID: HO3974

Este artigo foi útil?
Top