Single-Function: B2865, MS725, MS821, MS822, MS823, MS825, MS826
Multifunction: M5255, M5270, MB2770, MX721, MX722, MX725, MX822, MX826, XM5365, XM5370, XM7355, XM7370,
A 202.x3 (x denotes the paper source) paper jam can be caused by multiple factors including:
- Usage of unsupported or defective media
- Mismatched paper settings on the device
- Incorrectly loaded paper in the tray
- Damaged Fuser
To resolve this issue. follow the instructions on printer home screen to clear the jam.
Note: Additional reference for information on how to clear paper jams from the front of the printer can be viewed here.
If the paper jam is cleared but reappears once more during printing, clear the jam and perform the steps below before continuing the next job.
Check Media Type
Verify whether the printer supports the type of media you are using. Refer to the Information Center for more information.
When printing specialty media, check that it meets all recommendations specified in the Paper and Specialty Media Guide.
Check the condition of the media.
Check How the Media is being Loaded
Check media level. Make sure the paper trays are not over filled and that the tray guides are set correctly.
Make sure the media size & type settings match the actual paper size & type loaded in the printer.
Ensure that the media stack's corners are straight; i.e., that the sheets are aligned.
Check the media's condition. Make sure its edges are not damaged and that no sheets are locked together.
Fan the media to make sure no sheets are locked together or that nothing is causing the sheets to stick together.
Check the Printer
Open the front and rear doors and check for any obstruction in the paper path areas. Clear the obstruction if one exists.
Check the condition of the pick roller. Clean the rollers if necessary. Also check the paper tray for any signs of damage.Note: Should any of the rollers be worn out or if the paper tray shows signs of damage, refer to the Still Need Help? section of this document.
When printing, make sure that the rear door is fully closed. If the rear door fails to close fully or should it show any signs of damage, refer to the Still Need Help? section of this document.
To improve your printer's feed reliability, Click here to learn How to Avoid Paper Jams.
Still Need Help?
Have the following available when calling Lexmark Technical Support;
- Printer model(s)
- Printer serial number
LEGACY ID: SO8955