Skip to Content Information Center
Lexmark MC3326

Lexmark MC3326

Lexmark CX/CSx31, MC/C3xxx and XC/C2326: Unable to Fully Open the Front Door and Cartridge Tray Gets Stuck when Tray Is Extended

Affected Products:

Single-Function: CS331, CS431, C2326, C3224, C3326 and C3426

Multifunction: CX331, CX431, MC3224, MC3326, MC3426, MC3224i, MC3326i, MC3426i and XC2326

Issue Description:

When replacing the toner cartridge, the cartridge tray gets stuck and the door will not completely drop down if the paper tray is set to a media size longer than Letter/A4.


  1. Apply downward pressure to the front door while simultaneously lifting the cartridge tray.

  1. Push the cartridge tray back into the printer until it frees itself.

  1. Lift the front door carefully.

  1. Remove the tray before completely lowering the front door.

Note:When replacing toner cartridges, always remember to remove the paper tray if the tray guides are set to any media longer than Letter/A4 before opening the front door.

Still Need Help?

Have the following available when calling Lexmark Technical Support;


War dieser Artikel hilfreich?