Skip to Content Information Center
Lexmark MS822

Brand new or out-of-the-box printer with IPDS card not printing

Issue description

The print jobs sent to a brand new or out-of-the-box printer with IPDS card are not being printed.


  1. Enable TCP 5001 after going through the Initial Set-up Wizard in setting up a brand new or out-of-the-box printer. To do this:

    • Navigate to Settings > Network/Ports > TCP/IP > TCP/IP Port Access. Select TCP 5001.
  2. Proceed to the usual steps for the printer IPDS set-up. Follow the instructions from the Card for IPDS and IPDS Printer and Host Setup Guide.

Note:  When Restore to Factory Default is performed on the printer, the TCP/IP port settings revert to their default values. In this case, enable back TCP 5001 to print IPDS.

If the issue persists, search for more information related to this issue or contact support for further assistance.


Pomohol vám tento článok?