Skip to Content Information Center
Lexmark MS821

Lexmark MS821

Configuring non-IPDS printing using WSCST and HPT

Overview

This article outlines the steps to print non-IPDS jobs using Workstation Customizing Object (WSCST) and Host Print Transform (HPT).

Steps to configure

  1. Retrieve WSCST

  2. Edit Source Member

  3. Compile

  4. Create DEVD for Non-IPDS Printing

  5. Add in WSCST

  6. Add WSCST to a Remote OUTQ

  7. Printing Non-IPDS job

Solution

Step 1: Retrieve WSCST

StepAction
aType RTVWSCST from a command line, and then press Enter.
bIn the Retrieve WSCST source (RTVWSCST) window, fill out the following fields:
  • Device Type: *TRANSFORM[press F10 for more keys]
  • Manufacturer type and model: *LEXMARKT634[or press F4 to display more options and choose printer model]
  • Source Member: LXKT650 [or you can have any name]
  • Source File: QTXTSRC [or use other existing source file]
  • Library: QGPL
  • Text Description: [optional]
cPress Enter.

Note:*Manufacture type and model = MFRTYPMDL*Source member = SRCMBR*Source file = SRCFILE

Step 2: Edit Source Member

StepAction
aType WRKMBRPDM from a command line, and then press Enter.
bType 3 in command line for Work with members.
c

In the Specify Members to Work With window, fill out the following fields:

  • File: QTXTSRC
  • Library: QGPL
d

Press Enter.

Note: If the WSCST has been successfully retrieved in the previous step, you should see the WSCST listed.

e

If you want to make changes in the WSCST attributes, then do the following:

  1. Type 2 beside LXKT650 [or the source member name created earlier], press Enter, and then follow the steps below.

  2. In SEU command line, type:

    • F OUTBINTBLE [or any printer configuration you would like to find and change].
  3. Note: Once you find the parameter you are looking for (e.g., OUTBINTBLE), you can now apply changes. Press Enter to save, and then F3 to exit.

  4. In the Exit menu, check the following values:

    • Change/create member: Y [YES to changes]
    • Member: LXKT650
    • File: QTXTSRC
    • Library: QGPL
  5. Press Enter and F3 to exit.

  6. There are no changes required, then press F3 to exit and proceed to Step 3.

Step 3: Compile

Compiling is done to update whatever changes were made on the WSCST.

StepAction
aType CRTWSCST from a command line, and then press Enter.
bIn the Create WCST (CRTWSCST) window, fill out the following fields:
  • Workstation customizing object: LXKT650HPT [or you can have any name]
  • Library: QGPL
  • Source Member: LXKT650 [name of the source member created earlier]
  • Text Description: [optional]
c

Press F10 for additional parameters.

  • Source file: QTXTSRC
  • Library: QGPL
  • Authority: *LIBCRTAUT
  • Replace object: *YES
d

Press Enter.

Note: *Workstation customizing object = WSCST Source member = SRCMBR *Source File = SRCFILE

IMPORTANT! Compile everytime there are changes in WSCST.

Step 4: Create DEVD for Non-IPDS Printing

In the command line, type the following:

CRTDEVPRT DEVD(NAWEEHPT) DEVCLS(*LAN) TYPE(3812) MODEL(1) LANATTACH(*IP) PORT(9100) ONLINE(*YES) FONT(11) FORMFEED(*AUTOCUT) INACTTMR(*SEC15) MFRTYPMDL(*LEXMARKT634) SYSDRVPGM(*IBMPJLDRV) WSCST(LXKT650)

Or just type:

CRTDEVPRT [press Enter]

Then fill out the following fields:

Device description: T650HPT [or you can have any name] Device class: *LAN Device type: 3812 Device Model: 1 LAN attachment: *IP Port number: 9100 Online at IPL: *YES Identifier: 11 Point size: Form feed: *AUTOCUT Separator drawer: *FILE Separator program: *NONE Library:

[press Enter]

Activation timer: 170 Inactivity Timer: *SEC15 Host print transform: *YES

[press Enter]

Manufacturer type and model: *LEXMARKT634 Paper source 1: *MFRTYPMDL Paper source 2: *MFRTYPMDL Envelope source: ASCII code page 899 support: *NO Image configuration: *NONE Character Identifier: Graphic character set: *SYSVAL Code page Remote location Name or address: 192.168.2.1 [the IP add of the printer, variable]. . System driver program: *IBMPJLDRV. . Worksation customizing object: LXKT650 Library: QGPL

Note:  Press Enter for WSCST field to show up.

Step 5: Add in WSCST

Add the WSCST to the printer config by changing DEVD. In the command line, type the following:

CHGDEVPRT DEVD(T650HPT) MFRTYPMDL(*LEXMARKT634) WSCST(QGPL/LXKT650)

Step 6: Add WSCST to a Remote OUTQ

In the command line, type the following:

CHGOUTQ OUTQ(T650HPT) TRANSFORM(*YES) MFRTYPMDL(*LEXMARKT634) WSCST(LXKT650)

Step 7: Printing Non-IPDS job

  • Make sure OUTQ contains a spool file that is non-IPDS and you are ready to print the spool file from OUTQ.
  • Everytime changes are done in WSCST, repeat steps 2, 3, 5, and 6. The steps are needed in order for the change in WSCST to be updated in printer device.

Additional information

The steps above enable printing of basicnon-IPDS jobsonly. Should you need further support on printing non-IPDS jobs, please contact IBM* service team.

*International Business Machines

Note:  Click here to view .pdf version of this procedure.

LEGACY ID: HO3928

Was this article helpful?
Top