This article explains how to perform a USB flash/thumb drive firmware update. Please use the section that corresponds to your generation of device.
2010 ‑ 2020 Lexmark MFP / SFP Series:
Insert USB Flash drive (FAT32 format).
Note: Newer versions of firmware on certain models may support NTFS format of the flash drive.
Go to the Home Screen of the control panel.
Go to the USB Drive.
Note: On some smaller screen devices, after going to “USB Drive” the user can see a “Scan from USB” and “Print from USB” option. Select “Print from USB” before proceeding to Step 4 below.
Find and select the firmware update file (*.fls file).
Select Update Code.
Note: Do not turn off the printer while the update is going on.
Upon successful completion of the firmware update, the device reboots automatically.
2008 Lexmark SFP Series:
4‑Line APA Panel Instructions
Insert the USB flash drive (FAT32 format).
Device displays the USB Menu with a listing of the flash drive’s file contents.
Press the Down Button until the appropriate .fls file is selected.
Press the Check Button to select this file.
Update and Do Not Update appears on the LCD. If you must abort the update, press the Down Button and select Do Not Update.
To update the firmware select Update.
2008 Lexmark MFP Series:
Insert the USB flash drive (formatted to FAT32).
Press the USB Drive button when it appears.
Press the Down Button or the Up Button until the firmware file is located.
Press the Select Button next to the file.
Press Update Firmware.
Note: Do not turn off printer while the update is going on.
If the USB flash drive is not recognized, check that the drive is formatted to FAT32 format.
If the firmware update fails, recopy the firmware update file (*.fls) to the flash drive or download the file again.
LEGACY ID: HO3453
케이블을 올바른 포트와 소켓에 연결하여 프린터를 구성하기 시작합니다.
컴퓨터에서 문서를 인쇄하고 문서를 컴퓨터로 스캔할 수 있도록 프린터를 추가합니다.