Skip to Content Information Center
Lexmark MX622

Lexmark MX622

Multi-feeding Pages into the ADF

ENUS6937

Affected products

Click

Properties

in the title section above.

Overview

When copying or scanning multiple sheets from the ADF, the feeder picks several sheets into the scanner at one time and feeds them through. There may, or may not be a jam. Sometimes all of the multi-picked sheets will go through the entire path without jamming.

Solution

StepAction
1

Make sure that the original media has been separated, has no staples, and is not welded together from staples, or stuck together in any way. Fan and flex the media before loading them into the ADF tray.

2

If multi-feeding still occurs, then turn on ADF DeSkew by navigating through Settings > Device > Maintenance > Scanner Configuration > ADF Deskew > set it to ON.

3

Should the issue persists, please contact Lexmark Technical Support for further assistance.

Contacting Lexmark

If you need additional assistance, please close this browser tab or go to the Lexmark support site, type your printer model and locate

Get in Touch with Lexmark! for contact information.
NOTE:
When calling for support, you will need the following:

  • Name and version of the solution
  • Affected printer model/s
  • Printer serial number

Please be near the product/s described in this article to expedite the support process and reduce callbacks.


LEGACY ID: SO8678

Was this article helpful?
Top