Skip to Content Information Center
Lexmark CX921

Lexmark CX921

How to Load the 2500-Sheet Tray on the MS/MX91x and CS/CX92x Printers and MFPs

Affected Products:

Single-Function: C9235, CS921, CS923, CS927, MS911

Multifunction: CX920, CX921, CX922, CX923, CX924, XC9225, XC9235, XC9245, XC9255, XC9265, MX910, MX911, MX912, XM9145, XM9155, XM9165

Issue Description:

This information ensures proper loading of the 2500-sheet tray.

This tray is designed to specifically accommodate 4 ~500-sheet reams (two reams per side) of US Letter/A4 paper only.

Before you Begin

Open the drawer to interpret the loading instructions label.

Loading Paper in the 2500-sheet Tray

Tray 3 top view

  1. Open the drawer, make sure the transfer guide is in the far left position, and load paper on both sides in the order specified by the label; i.e., 1, 2.

  2. Verify an observablegap between the two stacks of paper.

  3. Verify paper stacks are pressed to the side-walls of the tray.

  4. Verify paper height does not exceed the stack-

    height indicator


Transfer guide and actuator (orange)

Triangle – Paper stack transfer guide.

SquareIndicator (Paper sensor actuator for the reserve tray)

  1. Verify Indicator moves freely with spring action that presses towards the front of the drawer.

  2. Verify transfer guide is not in the

    center of your two stacks of paper.

  3. Verify correct size media is loaded in the drawer; i.e.,



Related Information

Failure to follow these paper-loading instructions can cause misfeeds, jams, and service engine errors.

  • xref_SO7591_xref
  • xref_SO7896_xref

Still Need Help?

Have the following available when calling Lexmark Technical Support;

  • Printer model(s)

  • Printer serial number


Was this article helpful?