Skip to Content Information Center
Lexmark CX924

Lexmark CX924

Lexmark C9235, CS/X92x, XC92xx: Packaging Material that Is Not Removed Causes 202.93 Paper Jam and Print Quality Issue

Affected Products:

Single-Function: CS927, CS923, CS921, and C9235

Multifunction: CX920, CX921, CX922, CX923, CX927, XC9225, XC9235, XC9245, XC9255, and XC9265

Issue Description:

This is an Out of the Box (OOB) issue since it is induced during the installation of the Lexmark device.

It has been observed that there are reports of error messages and print quality defects after the setup and installation of these devices, specifically when packaging shipping clips are not removed from the transfer roller.

Solution:

  1. Check the Lexmark device for any packaging material that was missed.

  2. Remove the packaging materials located in the Second Transfer Roller.


    NOTE:

    There are two packaging shipping clips that are found in the Second Transfer Roller.

Additional Resources:

Please check the following resources for additional instructions and other commonly missed packaging material, when setting up the printer and removing the packaging materials:

Related Articles:

  • xref_TE889_xref - Common Issues Related to Setup and Installation on the Lexmark CS92x and CX92x

How-To Videos

Setup Sheets

Still Need Help?

Have the following available when calling Lexmark Technical Support;

  • Printer model(s)

  • Printer serial number

LEGACY ID: SO8674

Da li vam je ovaj članak pomogao?
Top