These are all Out-of-Box (OOB) issue since they are induced during the installation of the Lexmark device.
It has been observed that there are reports of error messages and print quality defects after the setup and installation of these devices.
Specifically, induced by the incorrect installation of the device, most commonly due to the non-removal of packaging material.
Listed below is a list of the most common issues that were encountered after the installation:
824.00 Scanner motor error
Loud noise from scanner area
Scanner Packaging Screws were left on the device.
383.63 Finisher Error
Loud noise from Finisher option
Packaging Screw on Stapler Option not removed.
Print Quality Issue
202.93 Paper jam error
Packaging Shipping Clips not removed from Transfer Roller.
Print Quality Issue (Missing Plane)
Packaging Material not removed from Black (K) Photoconductor.
Sample print quality defects
Here are samples of potential print quality issues (PQI) when the packaging material is not removed completely from the Black (K) photoconductor.