Skip to Content Information Center
Lexmark MX611

Lexmark MX611

The `Outbound Traffic Maximum Speed? Value Is Ignored when Set to 256kbps or Below

What you will see

When the "Outbound Traffic Maximum Speed" is set to 256kbps or below, the printer ignores the outbound traffic limit and ramps it up to a greater speed as shown in this sample tracing software.


NOTE:
Outbound Traffic Maximum Speed is found on the printer’s embedded web server (EWS) – SettingsNetwork/PortsTCP/IP.

See to view steps to access printer's EWS.

Affected products

  • CX310
  • CX410
  • CX510
  • MX310
  • MX410
  • MX51x
  • MX61x
  • MX6500
  • MX71x
  • MX81x


NOTE:
An x denotes any number within a given printer model series.

Recommended solution

Update the printer’s firmware to PE Release code P550 or higher.

To obtain this version, please contact Lexmark Technical Support and reference this article ID. Support personnel can assist with the update procedure if necessary.

Still need help?

If you need additional assistance, please close this window, go to your product's support page and locate

Get In Touch with Lexmark! for contact information.
NOTE:
When calling for support, you will need your printer model/machine type and serial number (SN).

Please be near the products described in this article to expedite the support process and reduce call-back situations.

LEGACY ID: SO7669

Was this article helpful?
Top